Table of Contents
Advertisement
5.0 PROGRAMMING
5.1
DESCRIPTION OF USER INTERFACE
The user interface on the front panel of the control board allows the user to ascertain system status and
program the unit. The LCD display is a 2 x 16 character display with a backlight. The display provides
information about various menu items, described in this section, as directed by using the pushbutton
menu selections.
Refer to Figure 1-3 and the following figure for detailed pictures of the user interface. The table below
lists the buttons that are available for the user to interact with the unit.
Pushbutton/Switch Label
Enter
Exit
Next
Previous
Motor Down
Operating Mode Switch
Maintenance position of the Operating Mode Switch
Normal position of the Operating Mode Switch
SIG-QG-21-01
Version: A
SECTION 5
Figure 5-1 S-80 Front Panel User Interface (Enlarged View)
Table 5-1 User Interface Buttons/Switches
PROGRAMMING
Enter menu item
Exit menu item
Next menu item
Previous menu item
Drive the gate arm down when the Operating Mode
switch is in the Maintenance position.
Can be toggled to Maintenance or Normal mode.
Enter Maintenance mode to disable the GC input.
Enter normal mode to enable the GC input.
5-1
PROGRAMMING
Function
NOVEMBER 2021
Advertisement
Table of Contents
