Siemens SMART GATE S-80 Quick Start Manual page 43

Menu names/
Program Label
View/Program Gate Arm Length in increments of 2 feet.
Gate Arm
Used as part of the counterweight calculations in the
Length
Status menu Counterweight Vertical and Horizontal.
Enable/Disable Gate Arm Retention.
Enabled: maintain Gate Arm in the down position
Arm Retention actively.
Disabled: Do not actively maintain the Gate Arm in the
down position.
Program Up
Program the Gate Arm Vertical position in degrees.
Position
Program Set to
Program set to default parameters.
Default
Activations Resettable activation count.
SIG-QG-21-01
Version: A
Definition
5-5
PROGRAMMING
Default
16
(12' to 38' range)
Enabled
88º
(70 to 88 degree range)
-
-
NOVEMBER 2021