Preset Menu; Name Parameter - Motorola SE-1010 Product Manual

Preset Menu

The SE encoder has 30 presets. To review the factory-defined presets, see Table 1 on page 9.
Use the Preset menu to select the desired preset configuration.
To access the Preset menu and view options
1.
•
2. Press the right arrow ( > ) button to access the submenu: Name, Video, Audio1, Audio2,

Name Parameter

•
To change the name of a preset
1. To access the Name parameter in the Preset menu, press the right arrow ( > ) button until
2. Press the right and left arrow buttons to move the pointer to the name.
3. For each character in the name:
4. After changing the name, press the ENTER button.
12
Navigate to the Preset menu as shown below:
> P r e s e t
< > 1
VBI, PID, or PGM.
P r e s e t > N a m e
< > 1
the pointer is in front of the name and press ENTER.
•
Use the up and down arrow buttons to enter another letter or number.
•
Use the right arrow button to move the cursor to the next character.
•
Use the left arrow button to move the cursor backward.
Note: Names can be up to 28 characters.
To insert a space, choose the underscore character ( _ ).
N a m e V i d e o A u d i o 1
P r e s e t 1
V i d e o A u d i o 1
P r e s e t 1
SE-1010 / SE-2000 Encoder Product Manual, Version 1.0
A u d i o 2
A u d i o 2