Network Type Menu; Dvb-S (Satellite) Options - Motorola SE-1010 Product Manual

Network Type Menu

Use this menu to define DVB configurations for satellite (DVB-S), cable (DVB-C), and
terrestrial (DVB-T). These settings apply to the SE encoder, rather than to an individual
preset.
•
< > E N e t w o r k
To specify a network type
1. Navigate to the Network Type menu and press the right arrow button so the pointer ( > )
2. Press the ENTER button to move the blinking cursor to the Edit Line (second line).
3. Use the up arrow button to select the desired network type: MPEG, DVB-S, DVB-T,
4. Press the ENTER button to move the cursor to the Menu Line (top line).
To define a DVB configuration
1. Navigate to the Network Type menu and press the right arrow button to specify the
2. Press the ENTER button to move the blinking cursor to the Edit Line (second line).
3. Use Table 9, 10, or 11 to set the desired configuration.
4. Press the ENTER button to move the cursor to the Menu Line (top line).
Table 9
Option
Freq
Rate
FEC
Orbit Pos
Pos
Polarization
ModQPSK
20
> N e t w o r k T y p e
T y p e : M P E G
is in front of Network Type.
or DVB-C.
desired DVB configuration type (either MPEG, DVB-S, DVB-T, or DVB-C).

DVB-S (Satellite) Options

Definition
Downlink
Frequency
Transport
Symbol Rate
Forward
Error
Correction
Orbital
Position
Satellite's
Orbital
Position
Downlink
Polarization
Modulation
Type
D V B – S D V B – C
Description
Use the up and down arrow buttons to set the downlink
frequency (000.00000 to 999.99999 GHz). The default is
011.75725 GHz.
Use the up and down arrow buttons to set the desired
transport symbol rate (000.0000 to 999.9999 Msps). The
default is 056.3200 Msps.
Use the up and down arrow buttons to choose one of the
following options: 1/2, 2/3, 3/4, 5/6, 7/8 or None (Not
Identified). The default is 3/4.
Use the up and down arrow buttons to set the satellite's
bearing (000.0 to 999.9 degrees). The default value is
019.2 deg.
Use the up and down arrow buttons to set the satellite's
orbital position relative to the Greenwich Meridian: East or
West. The default is West.
Use the up and down arrow buttons to set downlink
polarization: Linear Horiz, Linear Vert, Circular Left, or
CircularRight. The default is Linear Horiz.
During typical standalone mode, Modulation Type is read-
only and is set to QPSK.
SE-1010 / SE-2000 Encoder Product Manual, Version 1.0
D V B - T