LG ipsolute LW6354 Series Owner's Manual
High definition network camera
Hide thumbs
Also See for ipsolute LW6354 Series:
- Owner's manual (56 pages) ,
- Owner's manual (56 pages) ,
- Owner's manual (48 pages)
Table of Contents
Related Manuals for LG ipsolute LW6354 Series
Summary of Contents for LG ipsolute LW6354 Series
- Page 1 OWNER'S MANUAL High Definition Network Camera Please read this manual carefully before operating your set and retain it for future reference. MODEL LW6324/LW6354 series LW342/LW345 series LW332/LW335 series LW352/LW355 series 1404 (V1.8)
-
Page 2: Table Of Contents
Recommended PC Requirements ...........4 Accessing the LG IP device..............5 LG Smart Web Viewer Overview ............6 Configuration menu overview ..........9 Configuring the LG Network Camera Device ......9 Accessing the Configuration menu .........9 System settings ..............10 Audio & Video settings ............17 Network settings ..............28 User settings .................34... -
Page 3: Introduction
Introduction The LG Network Camera is designed to use on an Ethernet network and must be assigned an IP address to make it accessible. This manual contains instructions on how to install and manage the LG Network Camera in your networking environment. Some knowledge of networking environments would be beneficial to the reader. -
Page 4: Operation And Settings
Before using the system Recommended PC Requirements • Before using the LG IP device make sure the connections are The LG IP device can be used with most standard operating systems correct and verify whether proper power supply is used. and browsers. •... -
Page 5: Accessing The Lg Ip Device
3.1 Start your Web browser. The IP Utility shows the MAC address, IP address, Model 3.2 Enter the IP address of the LG IP device in the address name and so on. bar of the browse. -
Page 6: Lg Smart Web Viewer Overview
LG Smart Web Viewer Overview It displays Video Codec, Resolution and FPS of the selected video stream. Check this option as the network connection type (TCP or UDP). If you check it, the client connects to the server using TCP connection. - Page 7 Displays the current surveillance live screen. You can monitor the camera 1. Click the [Snapshot] button and then image on the live view window of the LG the Snapshot window is displayed. Smart Web Viewer. 2. Click the [Save] button in the Snapshot window.
-
Page 8: Configuration Menu Overview
Click this button to connect or disconnect the audio communication The following table shows the list of menu items. between the LG IP device and the The configuration images are different from each model. connected PC. The option depends on the model. -
Page 9: Configuring The Lg Network Camera Device
Smart analytics Triggered Event Scheduled Event Configuring the LG Network Camera Device The features and options of the LG IP camera are configured through the Configuration menu. Only administrator-level users have permission to access the Configuration menu. Date & Time... - Page 10 Maintenance Time zone Set the time difference from GMT in the area where the IP device is installed. Select the time zone in the area where the IP device is installed from the drop down list. Time mode > Synchronize with NTP Server: Select if you want to synchronize the IP device’s date and time with those of the time server called NTP (Network Time Protocol).
- Page 11 Note: Storage Backup and Restore can happen on IP device having the same version of firmware. This feature is not intended for multi-configurations or for firmware upgrades. Firmware > Upgrade 1. Click the [Browse] button. 2. Find and open the firmware file. 3.
- Page 12 Notes: > Remove the micro SD card • The recorded file name is made automatically as the 1. Click the [Unmount] button. If the micro SD card is “[Created date of the file]_[GMT Recording Time].DAT” unmounted from the system correctly, the [Unmount] type.
- Page 13 Save: Click this button to confirm the settings. Note: • The downloaded file can be played by using the LG File player. The text settings on [Text Overlay] is preserved, even though initialize the camera from [Maintenance] or [Factory Reset].
- Page 14 Text Overlay (Optional) Basic Configuration When you select the [Normal Mode], you can adjust the [Date&Time], the [Text Information], the [X position], the [Y position] and the [User Title] function. And other functions are able to adjust by selecting the [Multiline Mode]. >...
- Page 15 LW352/LW355 series Capture Mode 16:9 4:3 or 5:4 Font Size Column Column > Multi-Line Text: Enter characters in the text field. Maximum input characters are depends on the resolution. > Color: You can make any color by adjusting R.G.B LEVEL. LW332/LW335/LW6354/LW6324 series >...
- Page 16 Language list The System log provides a summary of the status of the IP device. Select a language for the LG Smart Web Viewer configuration menu The unit records the data of the software activity in a file. and information display.
-
Page 17: Audio & Video Settings
Audio & Video settings Note: The option depends on the model. This table shows the differences between the models. Camera (Optional) LW332, LW342, LW352, LW6324, ITEM LW335 LW345 LW355 LW6354 Scene Mode Flickerless Max Shutter, Sens-Up x 60 x 64 x 64 x 60 Limit... - Page 18 > Sensor Framerate (Optional): You can select the Sensor Focus Framerate value between 30 and 25. Notes: • It is recommended to select Sensor Framerate value to 30 in 60 Hz region, 25 in 50 Hz region to reduce flicker. •...
- Page 19 Exposure HSBLC: Use for masking brightness of the specific area to view the subject more clearly. > AREA SETTING: Click the [Show] button to select area. > GRAY SCALE: Select a gray scale. > USER SCALE: Set a bright level. >...
- Page 20 on the [Shutter Speed] menu or [AGC] to [OFF], the [Sens- balance may not be obtained under the following conditions: Up] setting is not available. 1. When the scene contains mostly high color White Balance temperature objects, such as a blue sky or sunset. 2.
- Page 21 Privacy Mask menu. When you set to [On], [Mask Color], [Width], [Height], [Move X] and [Move Y] option is activated. Mask Color : You can make any color by adjusting R.G.B LEVEL and adjust the transparency of MASK. Height: Increase or decrease the vertical size of the mask.
- Page 22 each vertex. Select [Move] and then Special buttons to move the polygon. Note: • The [Privacy Mask] size is recommended to set the size default or more. • Adjust the size about 50% bigger, to cover the object completely. Note: If the video image size is 4:3 or 5:4 mode, the D-Zoom, D-Effect, and Stabilizer function is not activated for LW352 and LW355 models.
- Page 23 see the subject cleary under the low light condition. OPTION INDOOR TRAFFIC USER OUTDOOR: Change to the ELC mode not to decrease Max Shutter definition under too light condition. And decrease Shutter speed AUTO Manual (1/120) Brightness valuse slightly prevent to video of MIDDLE HIGH supersaturation.
- Page 24 Stream OFF: Turn off the digital effect. > D-ZOOM: Select [On] to set the digital zoom level. ZOOM: You can enlarge the screen. PAN: You can move the screen. (left or right) TILT: You can move the screen. (up or down) >...
- Page 25 box, the camera supports five types. (Highest, High, Medium, Region Of Interest Low and Lowest) > Alias: Enter the profile name you want to use. > Bit rate: If the [Quality] option set to CBR, this option is displayed. Edit the bit rate value from 256 kbps to 10 240 kbps.
-
Page 26: Network Settings
Network settings 2. Click the edge or corner of the window box to adjust the window size. 3. Click the [Save] button to save the settings. Basic Note: ROI area can not overlap with each other. Audio General Audio In >... - Page 27 IP address allocated router. the specified equipment happens on a network specifying a single address. > Web port: The default HTTP port number (80) can be changed to any port within the range 1 025 to 65 535. > RTP multicast: When enabled it reduces the transmission load on the camera by making the computer of the same >...
- Page 28 TCP/IP IPv4 address: Enter an IP address. Subnet mask: Enter a subnet mask address. Gateway: Enter the gateway address. DNS server status > Primary DNS server: Enter the Primary domain name server that translates the host names into IP address. >...
- Page 29 DDNS IP filtering This free service is very useful when combined with the LG DDNS The access of the IP addresses in the list are allowed or denied Server. It allows the user to connect the IP device using the URL, according to the choice made in the drop-down list of the Basic rather than an IP Address.
- Page 30 Deny all: Deny all the IP address basically, but the IP • Remove: Click this button to delete the IPv6 address. addresses in the list are allowed. It needs at least one IP 1. Select the alias from the list. address to activate this function.
- Page 31 802.1x > Password: Type the password for the SNMP. • Save: Click this button to confirm the settings. Specifies whether 802.1x network access is enabled. You can specify network Quality of Service (QoS) settings. 802.1x/EAPOL using EAP-TLS > Enable: Select on to enable the protocol. Current authorization status of 802.1x port is displayed on buttons QoS DSCP Configuration right.
-
Page 32: User Settings
Notes: Basic Configuration > EAPOL Version: Select the EAPOL version. • When you set to [On] on the [Enable] option, [Enable anonymous login] option is enabled automatically. > EAP ID: Enter the ID of the client certificate using up to 16 characters. - Page 33 Note: 2. Enter the new User ID and Password. (Should have a minimum of 4 characters and preferably a combination The default administrator user ID ‘admin’ and ‘anonymous’ of alphanumeric.) are permanent and cannot be deleted. 3. To confirm the password, retype the password that you Anonymous typed in the Password box.
-
Page 34: Event Settings
Event settings MJPEG 720p HIGHEST Up to 7 LW352,LW355 series Event Server Video Frame Maximum Event Servers are used to receive the recorded video clip and/or Resolution Quality Codec Rate RTP stream notification messages. H.264 2 040 x 1 536 HIGHEST Up to 10 MJPEG... - Page 35 User ID: Type the user name for the Folder shared in Address: Enter the SMTP server address. the FTP server. Port: Enter the port number. The default port is 25. Password: Type the password for the folder shared in Enable SSL: Check when use the SSL (Secure Socket the FTP Server.
- Page 36 Sensor & Relay Motion detect Sensor > Enable: Marks up when you want to activate the sensor. > Alias: Displays the sensor name. > Type: Select the sensor type. Relay Preview > Control duration: Enter the relay time. You can preview the motion detection window on the preview >...
- Page 37 Triggered Event How to set the motion detect window 1. Click the [Add] button. The motion detect window is When an event (VA/ Motion detect/ Sensor Event) occurs, this unit displayed. You can add the five windows maximum for records the live images and routes as configured. motion detection area.
- Page 38 Scheduled Event FTP server(JPEG): Sends the JPEG Image to the FTP server. Image file and suffix setting is available. You can select Date/Time or Sequence of Suffix. • Stream: Selects the stream of the connected camera. • Programmable Alarm(Optional): When the sensor event is activated, the camera will start the recording with the setting value of these options.
- Page 39 Notes: • You can select through drag of Activation Time table that is possible to select according to weekday and time. • Used stream is profile of Master or HD resolution in case of FTP(JPEG) transmission. If always checkbox next to FTP(JPEG) is checked, FTP(JPEG) is always enable regadless of the activation time.
-
Page 40: Reference
• IP Conflicts: If the LG network device is set with a static IP address and if the DHCP option is set then there may be IP’s same as the network device and other network partner. Hence set the static IP address to 0.0.0.0 to resolve this conflict. - Page 41 After the factory settings login using the default user name and password. Video Streaming problems • If the video streaming does not start on the Web browser, install the LG Web Client ActiveX program on your computer following the instructions on the Web browser. •...
- Page 42 • If we obtain lower frame rate than set we need to check from the system administrator for sufficient bandwidth available or reduce the number of applications running on the client computer. • If the client PC’s are unable to access the multicast stream, check with the system administrator for the use of a valid multicast address or check if the router is supporting multicasting.
-
Page 43: Open Source Software Notice
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. -
Page 44: Specifications
Specifications LW332/LW335/LW6324/LW6354 Series Item LW332 LW335 LW6324 LW6354 Image Device 6.08 mm (1/3 type) Progressive Scan CMOS (1.3 Mega Pixels) DC-Iris, CS Mountable (Optimization of 6.08 mm Lens Type F1.2 Varifocal Lens (2.8 mm to 10 mm) (1/3 type) Lens of 1.3 Mega Pixels or above) Day/Night Color 0.3 lx (F1.2, Gain : High) - Page 45 TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP Protocol IPv4 FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG) Operation Temperature/Humidity -10 ºC to 50 ºC / 0 % RH to 80 % RH Power Source PoE (IEEE 802.3af ), DC 12 V (±20 %) Power Consumption 6.5 W...
- Page 46 LW342/LW345 Series Item LW342 LW345 Image Device 6.49 mm (1/2.8 type) Progressive Scan CMOS (2 Mega Pixels) Lens Type DC-Iris, CS Mountable (Optimization of 6.49 mm (1/2.8 type) Lens of 2 Mega Pixels or above) Day/Night Minimum Color 0.5 lx (F1.2, Gain : High) Illumination 0.007 lx (F1.2, Gain : High) Support...
- Page 47 Ethernet 10/100 Ethernet TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP IPv4 and IPv6 Protocol FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG) IPv4 Operation Temperature/Humidity -10 ºC to 50 ºC / 0 % RH to 80 % RH Power Source PoE (IEEE 802.3af ), DC 12 V (±20 %)
- Page 48 LW352/LW355 Series ITEM LW352 LW355 Camera Image Device 6.49 mm (1/2.8 type) Progressive Scan CMOS (3.0 Mega Pixels) Lens DC-Iris, CS Mountable (Optimization of 6.49 mm (1/2.8 type) Lens of 3 Mega Pixels or above) Color 0.4 lx (F1.2, Gain : High) Illumination 0.005 lx (F1.2, Gain : High) Resolution...
- Page 49 Security Password Protection, HTTPS(SSL, TLS) Protocol IPv4 and IPv6 TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP IPv4 FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG) Management Integrated Client LG Ipsolute VMS Open Protocol ONVIF 2.2 Profile S,PSIA 1.1 Remote S/W...