LG LW335 Series Owner's Manual
High definition network camera
Hide thumbs
Also See for LW335 Series:
- Owner's manual (84 pages) ,
- Owner's manual (50 pages) ,
- Owner's manual (56 pages)
Table of Contents
Related Manuals for LG LW335 Series
Summary of Contents for LG LW335 Series
- Page 1 OWNER'S MANUAL High Definition Network Camera Please read this manual carefully before operating your set and retain it for future reference. MODEL LW6324/LW6354 series LW342/LW345 series LW332/LW335 series LW352/LW355 series 1212 (V1.3)
-
Page 2: Table Of Contents
Accessing the LG IP device..............5 Reset setting .................39 LG Smart Web Viewer Overview ............6 Configuration menu overview ..........8 Reference ..................40 Configuring the LG Network Camera Device ......8 Troubleshooting .................40 Accessing the Configuration menu .........8 Open source software notice ............43 System settings ...............9 Specifications..................44... -
Page 3: Introduction
Introduction The LG Network Camera is designed to use on an Ethernet network and must be assigned an IP address to make it accessible. This manual contains instructions on how to install and manage the LG Network Camera in your networking environment. Some knowledge of networking environments would be beneficial to the reader. -
Page 4: Operation And Settings
The LG Ipsolute VMS and the LG Smart Web Viewer program Web Browser version 6.0 and below the version 8.0. are the network program of the LG Video Server and the LG IP cameras. DirectX 9.0c (Windows XP), DirectX 11 DirectX •... -
Page 5: Accessing The Lg Ip Device
The IP Utility can automatically discover and display LG IP 3.1 Start your Web browser. devices on your network. 3.2 Enter the IP address of the LG IP device in the address The IP Utility shows the MAC address, IP address, Model bar of the browse. -
Page 6: Lg Smart Web Viewer Overview
LG Smart Web Viewer Overview Click to display the check box of [Hostname], [Framerate] and [Bitrate] options. [Display] is displayed on left top of the live view window in order of selecting options. Video Analysis > Hide: Video Analysis display function is not in use. - Page 7 (Color icon: On, Gray scale icon: Off.) screen. You can monitor the camera Click this button to switch the image on the live view window of the LG microphone off and on for the computer. Smart Web Viewer. (Color icon: On, Gray scale icon: Off.)
-
Page 8: Configuration Menu Overview
Date & Time Configuring the LG Network Camera Maintenance Device System Storage The features and options of the LG IP camera are configured Text Overlay Option through the Configuration menu. Log & Report Only administrator-level users have permission to access the Language Configuration menu. -
Page 9: System Settings
System settings Time zone Set the time difference from GMT in the area where the IP device is installed. Select the time zone in the area where the IP device is Version installed from the drop down list. Displays the current Model Name and Software version. Time mode >... - Page 10 Maintenance Note: Backup and Restore can happen on IP device having the same version of firmware. This feature is not intended for multi-configurations or for firmware upgrades. Firmware > Upgrade 1. Click the [Browse] button. 2. Find and open the firmware file. 3.
- Page 11 Storage > Set as NTP server IP: Click this button to use the entered Recording Server IP as the NTP server IP. Notes: • The recorded file name is made automatically as the “[Created date of the file]_[GMT Recording Time]+(-) [Value of the Local Time minus GMT Time (Second)]_[Use or not of the Daylight saving time(N/D)][Stream index] [DeleteFlag].DAT”...
- Page 12 SD card has insufficient space. DirectShow such as Windows Media Player and MPlayer. • The downloaded file can be played by using the LG File player. > Remove: Delete file from the SD card. Operation and settings...
- Page 13 Text Overlay Log & Report Log & Report status The System log provides a summary of the status of the IP device. The unit records the data of the software activity in a file. Text Overlay > View Log: Click this button to display the system log >...
-
Page 14: Audio & Video Settings
Language Audio & Video settings Camera Language list Select a language for the LG Smart Web Viewer configuration menu and information display. • Save: Click this button to confirm the settings. Preview You can preview the camera image on the preview window. - Page 15 Note: constant bit rate. The Capture mode is not initialized. > Stream quality: If the [Quality] option set to VBR, this option is displayed. Select the stream quality from the drop down Stream box, the camera supports five types. (Highest, High, Medium, Low and Lowest) >...
- Page 16 Note: Region Of Interest ROI area can not overlap with each other. Audio Audio In > Enable: Click the check box if you want to send the audio from the microphone input connector. Note: The Clients connected to the IP device remain unaffected with additional changes made in the setting.
-
Page 17: Network Settings
Network settings ARP Ping > Enable ARP Ping to configure IP address: Check to enable ARP ping. Basic • Save: Click this button to confirm the settings. RTP stream RTP (Real-time Transport Protocol) is an internet protocol that allows programs to manage the real-time transmission of multimedia data, via unicast or multicast. - Page 18 TCP/IP > RTP multicast: When enabled it reduces the transmission load on the camera by making the computer of the same segment network receive the same transmission data. When multicast option is checked then select Video Port number, Audio Port number and Data port number. IPv4 address: Set the IP address for RTP multicast.
- Page 19 > Statically set: Select this option when you set a fixed IP address, with this setting, specify the IP address, Subnet This free service is very useful when combined with the LG DDNS mask and default gateway manually. Server. It allows the user to connect the IP device using the URL, IPv4 address: Enter an IP address.
- Page 20 IP filtering Deny all: Deny all the IP address basically, but the IP addresses in the list are allowed. It needs at least one IP The access of the IP addresses in the list are allowed or denied address to activate this function. according to the choice made in the drop-down list of the Basic policy option.
-
Page 21: User Settings
User settings • Remove: Click this button to delete the IPv6 address. 1. Select the alias from the list. Basic 2. Click the [Remove] button. The IPv6 address will be deleted. The IP device is shipped with the login rights of administrator only. SNMP If others need to access the IP device excluding the configuration a login with viewer rights need to be created. - Page 22 4. Select the authority from the drop down list to provide Anonymous the access rights to each user and then click the [Save] to > Enable anonymous login confirm your selection. Check the box to enable anonymous user login - allows the Administrator: Allows you to operate setup menus user access for only viewing the live stream image.
-
Page 23: Event Settings
Event settings LW352/LW355 Series Maximum Frame Event Server Video Codec Resolution Quality Rate stream Event Servers are used to receive the recorded video clip and/or notification messages. H.264 2040x1536 HIGHEST Up to 10 MJPEG 2040x1536 HIGHEST Up to 7 Note: Preview window of the IP device setting and preset setting are affected by this setting. - Page 24 User ID: Type the user name for the Folder shared in Address: Enter the SMTP server address. the FTP server. Port: Enter the port number. The default port is 25. Password: Type the password for the folder shared in Enable SSL: Check when use the SSL (Secure Socket the FTP Server.
- Page 25 Sensor & Relay Motion detect Sensor > Enable: Marks up when you want to activate the sensor. > Alias: Displays the sensor name. > Type: Select the sensor type. Relay Preview > Control duration: Enter the relay time. You can preview the motion detection window on the preview >...
- Page 26 Triggered Event How to set the motion detect window 1. Click the [Add] button. The motion detect window is When an event (VA/ Motion detect/ Sensor Event) occurs, this unit displayed. You can add the five windows maximum for records the live images and routes as configured. motion detection area.
- Page 27 Scheduled Event FTP server(JPEG): Sends the JPEG Image to the FTP server. Image file and suffix setting is available. You can select Date/Time or Sequence of Suffix. • Stream: Selects the stream of the connected camera. • Programmable Alarm(Optional): When the sensor event is activated, the camera will start the recording with the setting value of these options.
-
Page 28: Osd Menu Setup
OSD Menu Setup Notes: • You can select through drag of Activation Time table that is The following table shows the list of menu items and options. possible to select according to weekday and time. These options are depending on models. •... - Page 29 DAY/NIGHT AUTO LEVEL LOW/ MIDDLE/ HIGH RECTANGLE MASK AREA1 to NUMBER AREA8 DWELL TIME The option depends on RECT. the model. ON/OFF DISPLAY EXIT RET/TOP/END HEIGHT 4 to 100 WIDTH 4 to 100 NIGHT MOVE Y 2 to 98 3D-DNR MOVE X 2 to 98 RET/TOP/...
- Page 30 RET/TOP/ LANGUAGE The option depends on the model. EXIT EXIT RET/TOP/END EXIT RET/TOP/END SCENE BACK FOCUS MANUAL MODE BKLT ADJUST LOWLIT ABF PUSH OUTDOOR FOCUS RESET INDOOR D/N ABF OFF/ON TRAFFIC EXIT RET/TOP/END USER SPECIAL D-ZOOM RESET CAMERA REBOOT ZOOM FACTORY RESET TILT...
-
Page 31: General Operation
General Operation Notes: • button: Used to move upper direction on the menu screen. 1. Click the [OSD control] button on the LG Smart Web Viewer. • button: Used to move lower direction on the menu screen. 2. Click button on the OSD control window. - Page 32 WDR/BLC BRIGHTNESS Use WDR/BLC option to view the object clearly in backlight You can increase the brightness of the darkened video. If you set the conditions. brightness to lower value, the image gets darkened. If you set the brightness to higher value, the image gets bright. 1.
-
Page 33: White Balance Settings
SENS-UP White Balance settings If pictures are not clear due to darkness, this SENS-UP operation Select the method by which the camera shifts its output colors to would increase the sensitivity of picture. compensate for the color of a light source. 1. -
Page 34: Day/Night Settings
3D-DNR setting OUTDOOR: The color temperature range for the proper white balance is approximately 5 100 K. > RED: Set the desired red value. > BLUE: Set the desired blue value. Day/Night settings 1. Select [3D-DNR] option. If pictures are not clear due to noise, this option would reduce the noise of picture. -
Page 35: Privacy Setting
Privacy setting MOVE Y: Moves vertical position of the mask. MOVE X: Moves horizontal position of the mask. This function is aiming at the protection of personal privacy. The • CIRCLE : selected part is not displayed on the screen. >... -
Page 36: Back Focus Setting
Back Focus Setting FOCUS RESET Reset the focus point to factory default position. The back focus function is activated automatically according to your Select the [FOCUS RESET] option on the [BACK FOCUS] menu and setting. And also, when the Day&Night function is activated, the then click button. -
Page 37: Special Menu Settings
Special menu settings D-EFFECT (Digital effect) You can select the digital effect. 1. Select the [D-EFFECT] option on the [SPECIAL] menu. 2. Use button to select a digital effect. • V-FLIP: Flip the picture vertically. • MIRROR: Turn on the mirror effect. •... - Page 38 PIP (Option) USER TITLE You can view an image in PIP(picture in picture) mode. You can use the camera identification to assign a number and character to the camera. 1. Select the [PIP] option on the [SPECIAL] menu. To disappear the user title, select [OFF]. 2.
-
Page 39: Scene Mode Setting (Option)
SCENE mode setting (Option) Notes: • Set each value of option as selected option on the [SCENE You can set value installed camera environment properly using this MODE] like as below table. function. Several configuration value is set automatically to select option. -
Page 40: Reset Setting
SHARPNESS BRIGHTNESS SENS-UP EXPOSURE • Value of [SCENE MODE] is not initialized even the reboot system. If you set to [STD], the defaut value of [SCENE MODE], run factory reset. • If you use not DC Iris lens but Manual Iris lens, must set ELC mode on the [EXPOSURE] option. -
Page 41: Reference
• IP Conflicts: If the LG network device is set with a static IP address and if the DHCP option is set then there may be IP’s same as the network device and other network partner. Hence set the static IP address to 0.0.0.0 to resolve this conflict. - Page 42 After the factory settings login using the default user name and password. Video Streaming problems • If the video streaming does not start on the Web browser, install the LG Web Client ActiveX program on your computer following the instructions on the Web browser. •...
- Page 43 • If we obtain lower frame rate than set we need to check from the system administrator for sufficient bandwidth available or reduce the number of applications running on the client computer. • If the client PC’s are unable to access the multicast stream, check with the system administrator for the use of a valid multicast address or check if the router is supporting multicasting.
-
Page 44: Open Source Software Notice
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. -
Page 45: Specifications
Specifications LW332/LW335/LW6324/LW6354 Series Item LW332 LW335 LW6324 LW6354 Image Device 6.08 mm (1/3 type) Progressive Scan CMOS (1.3 Mega Pixels) DC-Iris, CS Mountable (Optimization of 6.08 mm Lens Type F1.2 Varifocal Lens (2.8 mm to 10 mm) (1/3 type) Lens of 1.3 Mega Pixels or above) Day/Night Color 0.3 lx (F1.2, Gain : High) - Page 46 IPv4 and IPv6 TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP Protocol IPv4 FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG) Operation Temp/Humidity -10 ºC to 50 ºC / 0 % RH to 80 % RH Power Source PoE (IEEE 802.3af ), DC 12 V (±20 %) Power Consumption 6.5 W...
- Page 47 LW342/LW345 Series Item LW342 LW345 Image Device 6.49 mm (1/2.8 type) Progressive Scan CMOS (2 Mega Pixels) Lens Type DC-Iris, CS Mountable (Optimization of 6.49 mm (1/2.8 type) Lens of 2 Mega Pixels or above) Day/Night Minimum Color 0.5 lx (F1.2, Gain : High) Illumination 0.005 lx (F1.2, Gain : High) Support...
- Page 48 Ethernet 10/100 Ethernet TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP IPv4 and IPv6 Protocol FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG) IPv4 Operation Temperature/Humidity -10 ºC to 50 ºC / 0 % RH to 80 % RH Power Source PoE (IEEE 802.3af ), DC 12 V (±20 %)
- Page 49 LW352/LW355 Series ITEM LW352 LW355 Camera Image Device 6.49 mm (1/2.8 type) Progressive Scan CMOS (3.0 Mega Pixels) Lens DC-Iris, CS Mountable (Optimization of 6.49 mm (1/2.8 type) Lens of 3 Mega Pixels or above) Color 0.4 lx (F1.2, Gain : High) Illumination 0.005 lx (F1.2, Gain : High) Resolution...
- Page 50 Security Password Protection, HTTPS(SSL, TLS) Protocol IPv4 and IPv6 TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP IPv4 FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG) Management Integrated Client LG Ipsolute VMS Open Protocol ONVIF 2.2 Profile S,PSIA 1.1 Remote S/W...