Transmission Method - Hitachi CP-TW2503 User Manual

7.4 Transmission method

The transmission method can be selected from the menus, only when the
(OPTION menu
7.4.1 HALF-DUPLEX
This method lets the projector make two way communication, but only one
the instructions below.
Computer
Transmitting data
the
OFF  1s  2s  3s ( OFF)
SERVICE

TCP/IP data Protocol change
Discarding data
Response data
(OPTION menu
)
7. Network Bridge Function
Serial data
RS-232C
RS-232C cable
Transmitting data
Response limit
time
Response data
Discarding data
SERVICE
)
85