Projector Management Using Snmp - Hitachi CP-TW2503 User Manual

8. Other Functions

8.2 Projector Management using SNMP

The SNMP (Simple Network Management Protocol) enables to manage the
projector information, which is a failure or warning status, from the computer on
the network.
NOTE
administrator.
Standard MIB (MIB-2)
Item
sysName
sysContact
Enhanced MIB
Projector Web Control.
Trap
In addition to e-mail alert shown in 8.1 Email Alerts (87), the following
Item
Cold Start
Authentication Failure
90
Projector name is set.
The information on where it is located. It has character string
Settings] - [Common Setup].
The information on the administrator's contact information. It
has character string set in sysContact (SNMP) in Projector
Web Control - [Network Settings] - [Common Setup].
When the projector is supplied with the power, it works as
below.
power status changes from "OFF" to "Standby state".
power status changes from "Standby state" to "ON (lamp is
turned on)".

(
community.
Description
Description