Hitachi CP-TW2503 User Manual page 96

8. Other Functions
8.4 Command Control via the Network (continued)
When the authentication setting is enabled, the following settings are required.
(55)
7) Click the [Security Settings] on the main menu.
8) Click the [Network Control] and enter the desired authentication password.
* See NOTE.
9) Click the [Apply]
NOTE
Port1 (Port: 23), Network Control Port2 (Port: 9715), PJLink™ Port (Port:
4352), My Image Port (Port: 9716) and Messenger Port (Port: 9719).
the network connection. You can restart the network connection from Network
Restart on the main menu. (63)
96
Network Control