Table of Contents
Advertisement
RRU3203
Installation Guide
Step 2 Fit one end of the auxiliary mounting bracket to one dual-nut bolt assembly of the main mounting
bracket.
Step 3 Install the bracket assembly on angle steel, and then fit the other end of the auxiliary mounting
bracket to the other dual-nut bolt assembly, as shown in
Figure 7-30 Installing the bracket assembly
Step 4 Using a torque wrench, tighten the nuts to 40 N·m (354.03 lbf·in.) to secure both the bracket
assembly onto the angle steel, as shown in
Issue 06 (2012-04-16)
Figure 7-29 Distance between the main mounting bracket and the ground
NOTE
It is recommended that the main mounting bracket be 1,200 mm (47.24 in.) to 1,600 mm (62.99 in.)
above the ground.
NOTE
Verify that the arrow on the main mounting bracket is pointing up.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
7-30.
Figure
7-31.
7 Installing the RRU
54
Advertisement
Table of Contents
