RRU3203
Installation Guide
Figure 8-20 Closing clips
Ensure that the exposed shield layer of the power cable is properly tightened using the clip.
Step 2 Insert waterproof blocks into vacant cable troughs in the cabling cavity, as shown in
8-21.
Figure 8-21 Correct placement of waterproof blocks
Step 3 Close the cover plate of the RRU cabling cavity and tighten the screws on the cover plate to 1.4
N·m (12.39 lbf·in.) using a torque screwdriver, as shown in
Issue 06 (2012-04-16)
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Installing RRU Cables
Figure
8-22.
Figure
82