Fujitsu 420D User Manual page 55

The following procedures allow you to navigate
the Setup Utility menus:
1. To select a menu,use the cursor keys:
2. To select a field within a menu or a submenu,
use the cursor keys: , .
P O I N T
Selecting a field causes a help message
about that field to be displayed on the
right-hand side of the screen.
3. To select the di erent values for each field,
press the Spacebar or + to change to the next
higher selection and F5 or – to go to the next
lower selection.
4. To activate a submenu press the Enter key.
5. To return to a menu from a submenu, press
the Esc key.
C o n f i g u r i n g Y o u r L i f e B o o k 4 0 0 S e r i e s
6. To go to the Exit Menu from any other menu,
press the Esc key.
7. Pressing the F9 key resets all items in the
, .
current menu to the default values.
8. Pressing the F10 key resets all items in the
current menu to the value which was set
when the Setup Utility parameters were
last saved.
9. Pressing the F1 key will give you a general
help screen.
L i f e B o o k 4 0 0 S e r i e s f r o m F u j i t s u
47