Safety; Maximum Slope Angles Of Mowers With Cab; Safety And Instructional Decals - Toro LT-F3000 Operator's Manual

Safety

WARNING
Working on the machine without the safety
support bracket increases the risk of injury to
you and others.
Before performing maintenance underneath
the operator platform and cab, ensure that the
safety support bracket is installed.
WARNING
The electrical system of the machine could
shock you and cause personal injury.
Before working on the machine electrical
systems, always disconnect the battery
terminals (negative terminal first) and ensure
that no contact is made between the terminals
and metal parts of the machine.
Important:
Always wear the seat belt when the
safety cab is installed.
Important:
Refer to your machine Operator's
Manual for advice and guidance when operating a
mower on slopes.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
1. Crushing hazard—always use the hood stay.
111-9775
Maximum Slope Angles of
Mowers with Cab
You can fit this cab to the mowers listed at the front of
this document. When fitted with a cab, each mower
model has a different maximum slope angle and this
is stated on the decal located on the lid of the storage
pod on the left of the machine. Refer to
Instructional Decals (page 3)
slope angle decal for your machine when fitted with
a cab.
decal111-9775
3
Safety and
for the correct maximum