Page 3
Please read this guide first! Dear Customer, Thank you for choosing a BEKO product. We would like you to achieve the optimal efficiency from this high quality product which has been manufactured with state of the art technology. Please make sure you read and understand this guide and supplementary documentation fully before use and keep it as a reference.
Failure to follow these instructions shall void any warranty. Children shall not be allowed play with • Beko products comply with the appli- the appliance. Cleaning and user main- • cable safety standards; therefore, in tenance shall not be made by children case of any damage on the appliance without supervision.
Page 5
Important safety and environmental instructions is fully complete. Do not operate the product without the • filter and do not remove the filters while Place the appliance in a way so that the • the product is running. plug is always accessible. In the event of be started any flame, Do not touch the lamps if they have op- •...
Page 6
Important safety and environmental instructions smoke. thorities or retailer where the product was puchased. Each household performs im- The ventilation in the room may be in- • portant role sufficient when the hood for electric hob is used simultaneously with the devices in recovering and recycling of old appli- operating on gas or other fuels (this ance.
4. Metal grease filter (Behind Glass Cover) 5. Control Panel 6. Lamp (Figure 2) 2.2 Technical Data Model HCA62640BE Supply voltage 220-240V ~ 50 Hz Lamp Power 2 x 3 W Motor Power 210 W Flow rate (m³/h) – 3.
Operation of the Appliance 3.1 Controlling the Appliance FUNCTION (A) : Light On / Off You may illuminate the cooking area by pressing this button. Re-press the button to turn off the lamp. (B) : 1. Stage Button Operates the appliance on 1st speed. When you press this button again to turn off the appliance, the screen speed stage turns off.
Page 9
Operation of the Appliance 3.5 Replacement of Lamp Operation with Flue Connection Vapour is extracted through • the flue duct, which is fastened to the connection head on the hood. The diameter of the flue duct must be the • same as the connection ring.
Cleaning and Maintenance 4.2 Replacement of Carbon Before cleaning and mainte- Filters nance, unplug the product or turn off the switch. Odour removing filters contain charcoal (Active carbon). Grease filters must be in- 4.1 Cleaning of the Aluminium stalled in the product, regardless of whether Grease Filter or not charcoal filters are used.
Installation Of Appliance 5.2 Installation Accessories WARNING! Before starting the installation, read the safety information on User Manual. WARNING! Failure to install with screws and stabilizers in accordance with these instructions may result in electric shock. For the installation of the hood, please contact the nearest Authorized Service.
Page 12
Installation Of Appliance maximum height (Page 8 / Figure 1). Mark the length of bolts. the holes where the flue connection plate The bolts and dowels provided are suit- • will be mounted with the help of a pen able for brick walls. For other construc- (Figure 7/a).
Page 13
Installation Of Appliance 5.4 Connecting to Flue (Figure 11) 1- Flap Pin Socket 2- Flap Pin Insert the plastic pin (Figure 11 / area no. 2) (Figure 9) on the pin socket on the motor exhaust (Figure Attach the 150mm plastic chimney adapter 11 / area no.1).
Page 14
Installation Of Appliance 5.6 Installation of Air Baffle While using with the carbon filter, air baffle is provided with your appliance with the aim of re-releasing the air which is cleaned with carbon filter from the perforated located on the flue. Assemble the air baffle as below. Suitable Not suitable (Figure 12)
Page 15
Installation Of Appliance (Figure 13) 1- Flap Pin Socket 2- Flap Pin Attach the flue flaps to the plastic flue adapter in the package content as follows. (Figure 15) Insert the plastic pin (Figure 13 / area no. 2) on the pin socket on the motor exhaust (Fig- Assemble the air baffle group with 3.9 x 22 ure 13 / area no.1 screws from point C, D, E, F that you have...
Troubleshooting Troubleshooting Root Cause Help Appliance is not Check your fuses. Fuse may be blown, inspect working. and restore it. Appliance is not Check the electrical connection. Mains voltage shall be working. between 220 and 240 V. Appliance is not Check the electrical connection.
Page 17
!ً ي ُرجى قراءة هذا الدليل أو ال ،عميلنا العزيز شكرا لكم على اختيار إحدى منتجات بيكو. نود أن تحققوا االستفادة المثلى من هذا المنتج عالي الجودة وال م ُص ن ّع باستخدام أحدث التقنيات. ي ُرجى التأكد من قراءة هذا الدليل والوثائق الملحقة بالكامل...
Page 18
تعليمات مهمة عن السالمة والبيئة 1.1 السالمة العامة يمكن لألطفال في عمر 8 سنوات فأكبر ، أو األشخاص الذين يعانون من يجب قراءة تعليمات السالمة المهمة هذه قصور في القدرات البدنية أو الحسية أو بعناية تامة واالحتفاظ بها للرجوع إليها ،العقلية،...
Page 19
تعليمات مهمة عن السالمة والبيئة .المنتج قيد التشغيل ضع الجهاز بحيث يكون قابس الطاقة .دائ م ً ا في مكان يسهل الوصول إليه في حال وقوع حريق، أوقف الجهاز وأي أجهزة طبخ أخرى. (أوقف الجهاز ال تلمس مصابيح الجهاز بعد تشغيلها .)أو...
Page 20
تعليمات مهمة عن السالمة والبيئة عمره االفتراضي. بل يجب أخذه إلى عند استخدام شفاط موقد كهربائي في الكهربائية األجهزة تجميع نقطة نفس الوقت مع األجهزة التي تستخدم واإللكترونية. يمكنك أن ترجع إلى اإلدارة الغاز أو أنواع الوقود األخرى، يجب المحلية التي تتبعها لمعرفة نقاط التجميع تهوية...
Page 22
تشغيل الجهاز 1.3 التحكم في الجهاز الوظيفة المفتاح يمكنك إنارة منطقة الطهي بالضغط على هذا ): تشغيل/ إيقافA( .الزر. أعد الضغط على الزر إلطفاء المصباح اإلضاءة يشغل الجهاز على السرعة األولى. عند ): 1. زر المرحلةB( الضغط على هذا الزر مرة أخرى يتم إيقاف تشغيل...
Page 23
تشغيل الجهاز 5.3 استبدال المصباح 6.3 التشغيل مع توصيل المداخن يتم استخراج البخار من خالل مجرى المداخن، والذي يتم تثبيته برأس التوصيل الموجود على .الشفاط يجب أن يكون قطر مجرى المداخن هو نفس حلقة التوصيل. في اإلعدادات األفقية، يجب أن يكون...
Page 24
التنظيف والصيانة 2.4 استبدال مرشحات الكربون قبل التنظيف والصيانة، افصل المنتج تحتوي مرشحات إزالة الرائحة على الفحم (الكربون .أو أوقف تشغيل المفتاح النشط). يجب تركيب مرشحات الشحوم على الجهاز .حتى في حال عدم استخدام مرشح الفحم 1.4 تنظيف مرشح الشحوم المصنوع من...
Page 25
تركيب الجهاز 2.5 ملحقات التركيب !تحذير قبل بدء التثبيت، اقرأ معلومات األمان .الموجودة في دليل المستخدم !تحذير قد يؤدي عدم التثبيت بالمسامير والمثبتات وف ق ً ا لهذه التعليمات إلى .التعرّ ض للصعق بالكهرباء لتركيب الشفاط، يرجى االتصال بأقرب خدمة .معتمدة...
Page 26
تركيب الجهاز .)1 وفق ً ا ألقصى ارتفاع (الصفحة 8 / الشكل 3.5 التثبيت على الحائط حدد الثقوب حيث سيتم تركيب لوحة توصيل يجب أن يكون الجدار مسطحا ومستقيما ويتمتع .)a / المداخن بمساعدة قلم (الشكل .بقدرة تحمل كافية يجب...
Page 28
تركيب الجهاز مناسب غير مناسب )12 (شكل 5.5 تركيب الشفاط على المداخن قم بعمل التوصيل الكهربائي للشفاط الخاص )15 (شكل بك قبل البدء في تركيب المداخن. ادخل ألواح قم بتجميع مجموعة حاجز الهواء باستخدام مسامير المداخن حول جسم الشفاط. قم بربط المداخن ...
Page 29
تركيب الجهاز 6.5 تركيب الحاجز الهوائي أثناء االستخدام مع مرش ّ ح الكربون، يتم تزويد جهازك بحاجز هوائي بهدف إعادة إطالق الهواء الذي يتم تنظيفه بمرش ّ ح الكربون من الفتحة الموجودة في المدخنة. قم بتجميع حاجز الهواء على النحو .التالي...
Page 30
استكشاف األخطاء وإصالحها مساعدة السبب الجذري استكشاف األخطاء وإصالحها ،قد يكون المنصهر محتر ق ًا .افحص المنصهرات .الجهاز ال يعمل افحصه وأصلحه يجب أن يكون جهد التيار .افحص الوصلة الكهربائية .الجهاز ال يعمل 240 الكهربائي بين 022 و .فولت تحقق مما إذا كانت األجهزة .افحص...