Locking And Unlocking The High-Connectivity Cradle - Fujitsu Point 1600 User Manual

7. If you are locking the pen tablet into the cradle, do so at this time. See "Locking
and Unlocking the High-Connectivity Cradle," later in this chapter for details.
8. Turn on peripheral devices connected to the cradle.
9. Start the pen tablet or, if you suspended the pen tablet, resume system
operation.
Note: If the required driver software for an attached device is not installed, the device
may not work or may work incorrectly. Contact your local help desk or refer to the
documentation provided with your peripheral device and install the driver software
at this time.

Locking and Unlocking the High-Connectivity Cradle

Note: Two versions of the high-connectivity cradle are available: a locking version and a
non-locking version. This section is applicable only to the locking version.
The high-connectivity cradle is equipped with a tubular lock that allows you to lock
the pen tablet into the cradle. You can also use the lock to lock the cradle latches in
the unlocked position. This allows the pen tablet to be inserted into and removed from
the cradle more easily as the cradle latches do not engage the pen tablet.
To lock the pen tablet into the high-connectivity cradle,
1. Ensure the pen tablet is inserted in the cradle and the cradle latches are engaged
in the locked position.
2. Insert the key into the tubular lock situated on the front of the high-connectivity
cradle and turn the key clockwise until it stops.
To unlock the pen tablet, insert the key into the tubular lock situated on the front of
the high-connectivity cradle and turn the key counter-clockwise until it stops.
2-16 Using Point 510/Point 1600 Connectivity Peripherals
2