Chapter 6 Consumables - Fujitsu ScanSnap S300 Getting Started Manual

Chapter 6 Consumables

This chapter describes how to replace and purchase consumables and regular replacement
parts.
WARNING
The following table lists the part numbers of consumables and shows rough guidelines
for replacing these parts.
No Description
1 Pad ASSY
2 Pick roller
These replacement cycles are rough guidelines when A4/Letter wood-free paper 64 g/m
(17 lb) is used. The actual cycle may differ depending on the scanned paper.
Use only the consumables specified by PFU LIMITED.
HINT
35
• Before cleaning the scanner, turn the scanner OFF to prevent fire or
electric shock.
• To avoid injuries, do not place the internal parts (such as the Pad
ASSY and Pick roller) in areas where small children can reach.
PA03541-0002
PA03541-0001
To estimate when the consumables will have to be replaced and to get
an overlook of the already scanned pages, refer to the following:
1. Right-click the [ScanSnap Manager] icon
2. Click [Check consumable supplies] at the menu.
⇒ The window ([Check consumable status] screen) that indicates how many
times consumables have been used will be displayed.
Replace the consumables referring to "Target value to change supplies" as a
rough guideline.
For details about consumables and where to purchase them, visit the
following Website or contact the Fujitsu scanner dealer where you
purchased your scanner.
[Website] http://scansnap.fujitsu.com/
P/N
10,000 sheets or one year
100,000 sheets or one year
Replacement Cycle
on the task bar.
S
2