Fujitsu ScanSnap S300 Getting Started Manual page 37

For information on how to replace the pad ASSY and the pick roller, refer
to "9.2 Replacing the Pad ASSY" and "9.3 Replacing the Pick Roller"
respectively in the "ScanSnap S300 Operator's Guide."
The contents of this manual are subject to change without notice. This manual may not be
reproduced, adapted or translated without prior written permission. READ THIS
ENTIRE MANUAL CAREFULLY BEFORE USING THIS PRODUCT. IF THIS
PRODUCT IS NOT USED CORRECTLY, UNEXPECTED INJURY MAY BE
CAUSED TO USERS OR BYSTANDERS. While all efforts have been made to ensure
the accuracy of all information in this manual, PFU LIMITED assumes no liability to any
party for any damage caused by errors or omissions or by statements of any kind in this
manual, its updates or supplements, whether such errors are omissions or statements
resulting from negligence, accidents, or any other cause. PFU LIMITED further assumes
no liability arising from the application or use of any product or system described herein;
nor any liability for incidental or consequential damages arising from the use of this
manual. PFU LIMITED disclaims all warranties regarding the information contained
herein, whether expressed, implied, or statutory. PFU LIMITED assumes no liability for
incidental or consequential damages arising from the use of this product, and any claims
by a third party.Copying of the contents of this manual in whole or in part and copying of
the scanner applications are prohibited under the copyright law.
ScanSnap S300 Getting Started
36