Watching Tv, Video, Rgb And Ieee1394 Mode; Ch Return; Antenna/Cable; Video - Fujitsu Plasmavision P37FT05AUB User Manual

WATCHING TV, VIDEO, RGB AND IEEE1394 MODE

TV
Select the TV mode to watch TV programs.
1
Press .
Terrestrial TV programs or cable TV programs are
available. The last program No. that you watched is
received.
2
Press to watch terrestrial
programs. Press
cable TV programs.
3
Select a desired Program No.
There are two methods to select a Program No.
Using -
Using or
* For more information, see P. E-14 "BASIC
CONNECTION AND PREPARATION OF THE
SYSTEM".

CH RETURN

The program can be toggled back to a previous channel,
video input or RGB input.
Press .
The program reverts to the channel viewed immediately
before the present channel. If the previous content was
from another video input, the video mode reverts to that
input.

ANTENNA/CABLE

Terrestrial or cable TV broadcastings can be selected.
Press .
The ANTENNA signal is selected.
Press .
The CABLE signal is selected.
About Auto Lock (Parental Lock)
• Auto Lock is provided for parents to determine that TV programs and video pictures not good for their children are blocked.
• Restrictions on the watching of TV programs can be placed by channel, age, and program category.
• For details, see "Auto Lock (Parental Lock) Setting" on P. E-36.
E-20
to watch
, or

VIDEO

Select the video mode to watch pictures through video
inputs.
Press .
Each time this button is pressed, the video input mode is
switched to the next one. The video input mode can
also be switched directly by pressing
the number button on the remote control.
VIDEO1: Video
VIDEO2: S-video
VIDEO3: Component video
VIDEO4: Component video
VIDEO5: HDMI
VIDEO6: HDMI
* For the settings of input terminals, see "EXAMPLE
OF CONNECTING EXTERNAL EQUIPMENT"
(P. E-18) and "Audio Input" (P. E-38).

RGB

Select the RGB mode to watch pictures through the
RGB input.
Press .
The RGB input mode is selected.
* For the settings of input terminals, see "EXAMPLE
OF CONNECTING EXTERNAL EQUIPMENT"
(P. E-18), "Selecting the settings of D-SUB Input
terminal" (P. E-34), and "Audio Input" (P. E-38).

Link 1394 (IEEE1394)

The connected devices can be controlled from the
display. (Control may be impossible, depending on the
device.)
Press .
The devices connected to the 1394 terminals are
displayed on the screen.
Select each device, and press
* For more information, see P. E-43 "IEEE1394
SETTING".
and then
.