Other Settings (Features Menu); Adjustment Items; Dot Clock; Clock Phase - Fujitsu Plasmavision P37FT05AUB User Manual

OTHER SETTINGS (FEATURES MENU)

• To adjust or set items such as Adjustment, On Screen Menu,
Input Terminal, and Channel Setting, select "FEATURES"
from the adjustment menu. See P. E-25 for the basic
procedures.
• The items to be adjusted or set are stored for each input
mode. Thus, execute the following operation after selecting
the input mode for the adjustment or setting.

ADJUSTMENT ITEMS

Dot Clock

You may find the vertically-striped pattern in pictures,
depending on the clock frequency of your PC's processor.
If you experience blurring, you can obtain a clearer picture by
adjusting the "Dot Clock".
Use or to adjust to minimize vertically-striped pattern in
pictures.
Press to store.

Clock Phase

Pictures and the outline of letters may blur or flicker as the
clock phase of your PC may be different. In this case, adjust
the clock phase manually. Normally, the "Auto" setting ensures
the optimal value.
Use or to select "Auto" or "Manual".
[Auto]: Makes automatic adjustment.
[Manual]: Makes manual adjustment.
Press or to adjust to minimize pictures blur.
Press to store.
Clamp Position for RGB, Component Video
Adjusts the extremely dark or bright picture. Normally, the
automatic setting ensures the optimal value.
Use or to adjust pictures optimally.
Press to store.

Auto Calibration

Adjusts the dynamic range of picture to the optimum. Execute
while a white screen signal is received.
(1) Select "Execute" and press
(2) Press or to select "YES", and press
Note
• If the operation is not executed for about 60 seconds, the menu disappears.
• Some functions are not available depending on the state or condition of use. (The adjustment screen may also vary slightly.)
• The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
for RGB
for RGB
for RGB
.
.

ON SCREEN MENU SETTING

"On Screen Menu" Screen

OSD

You can use this option to select from following display
indication.
Each time you press or , one of the available choices
appears in the following sequence:
On (OSD:bright)
[On (OSD:bright)]: On-screen information shown in
light color.
[On (OSD:dark)]: On-screen information shown in dark
color.
Press to store.
* If the screen picture is too bright, some characters may be
difficult to watch when [On (OSD:dark)] is selected.

Language

You can use this option to select the language displayed on the
screen.
Press or to select your desired language.
English
Español (Spanish)
Français (French)
Press .
The menu is displayed in the selected language.
On (OSD:dark)
E-33