Mitsubishi Electric MELSEC iQ-R Series User Manual page 51

5.
Add a high speed data communication module.
Item
Module Type
Module Name
Mounting Slot No.
Start I/O No. Specification
Start I/O No.
6.
Set whether to use module labels and sample comments, click the [OK] button.
7.
Set the module parameters of a high speed data communication module.
[Navigation window]  [Parameter]  [Module Information]  [RD81DC96]
8.
After setting the parameters, write the settings to a CPU module from an engineering tool.
9.
Reset the CPU module or turn the power OFF and ON to apply the settings.
Description
Select "Information Module."
Select "RD81DC96."
Select the slot number where a high speed data communication module is mounted.
Select "Not Set" when not specifying the start I/O number of a high speed data communication module; otherwise, select
"Set."
When "Set" is selected in "Start I/O No. Specification," enter the start I/O number of a high speed data communication
module.
4 PROCEDURES BEFORE OPERATION
4.1 Startup of High Speed Data Communication Module
4
49