8.3
Performing Streaming Transfer
This section shows the streaming transfer methods.
Building a C# sample program
Executing a C# sample program and checking the operation
1.
Switch the CPU module to the RUN state.
2.
Execute the "StreamingTransferSample.exe" file created after the build processing. (A console screen appears and a
streaming transfer starts.)
3.
Check that the device values specified in "General sampling label setting" (B0, D0) are displayed in the console screen.
1.
Example: C:\C#\SourceFile\HSDCSample.sln
2.
3.
B0
D0
Open a solution file.
When the "Review Project And Solution Changes"
screen appears, click the [OK] button.
Select "StreamingTransferSample" and build the
project.
8 OPERATION EXAMPLE
8.3 Performing Streaming Transfer
8
69