Recording Set Top Box Programs
Refer to "Important Notes for Recording" (
recording.
RAM -R -R DL -RW(V) +R +R DL +RW
Preparation:
•
Turn on the television and select the appropriate video input to suit the
connections to this unit (Example: AV input).
•
When using the set top box, make sure it is turned on.
•
RAM
If the disc is protected, release protection (
to turn the unit on.
–
"HELLO" appears on the unit's display.
;OPEN/CLOSE
–
Insert a disc with enough remaining blank space and press
[ ; OPEN/CLOSE] again to close the tray.
When the set top box is controlled with this unit:
3a
to select desired channel.
or
When the set top box is not controlled with this unit:
3b
to select "IN1" or "IN2".
–
Select a channel on the connected equipment.
to select the recording mode.
–
Recording mode should be determined by program length and
available time on the disc (
to start recording.
Pausing Recording
Press [ h PAUSE].
–
Press again to restart recording.
14
RQT9048
17) and "Advanced Recording" (
➔
to open the tray
(Button located on the upper front of the unit).
18).
➔
Remaining time
Recording mode
REC
Stopping Recording
Press [ g STOP].
➔
40).
➔
18, 19) for detailed information on
3a
3b
Tips
•
Icons such as "
" indicate usable
RAM
discs. Refer to pages 55 and 56.
Notes
•
-R -R DL -RW(V) +R +R DL +RW
It takes about 30 seconds for the unit
to complete recording management
information after recording finishes.
•
You cannot change the channel or
recording mode during recording.