Off Timer; Remote Control; Clock Settings; Quick Start - Panasonic DMR-EA18K Operating Instructions Manual

Off Timer

Select how long the unit remains on when it is not
being used.
Perform step 1 of "Accessing the Setup Menu" (➔ 42).
e , r to select "Setup", then q
e , r to select "Off Timer", then
e , r to select "2 Hours", "6 Hours"
or "Off", then

Remote Control

Use this function to synchronize the codes for the
remote control and the main unit.
Perform step 1 of "Accessing the Setup Menu" (➔ 42).
e , r to select "Setup", then q
e , r to select "Remote Control",
then
e , r to select "Set Code 1", "Set
Code 2", or "Set Code 3", then
to set.
While pressing and holding
press and hold the numbered button
, , or
the code set in step 4 for about 5
seconds to set.
to complete.

Clock Settings

Perform step 1 of "Accessing the Setup Menu" (➔ 42).
e , r to select "Setup", then q
e , r to select "Clock Settings", then
,
corresponding to
Set Clock Manually
After selecting "Clock Settings" (➔ left, step 3).
e , r to select "Set Clock Manually",
then
w , q to select the item you want to
change.
e , r
to change the setting.
– Repeat steps 5-6 to change other items.
to confirm new date and time
and to initiate the clock.
Set the time change dates for DST
Set the beginning and end dates for DST (➔ 12).

Quick Start

One Sec. Quick Start for Recording on DVD-RAM.
From the power off state, recording on DVD-RAM starts
about 1 second after first pressing [ ^ DVD POWER]
and then sequentially pressing [ * REC] (Quick Start
Mode). Power consumption is also higher when the unit
is turned off if this is set to "On".
Perform step 1 of "Accessing the Setup Menu" (➔ 42).
e , r to select "Setup", then q
e , r to select "Quick Start", then
e , r to select "On" or "Off", then

Restore Default Settings

This returns Setup menus to default settings, except for the
clock, ratings level, closed caption, and on-screen language.
Perform step 1 of "Accessing the Setup Menu" (➔ 42).
e , r to select "Setup", then q
e , r to select "Restore Default
Settings", then
e , r to select "Yes" or "No", then
43
RQT9048