Still Mode (Paused Video); Black Level Control; Dynamic Range Compression; Digital Audio Output - Panasonic DMR-EA18K Operating Instructions Manual

e , r to select "Settings for
Recording", then
e , r to select "EP-Extended Play
(6H)" or "EP-Extended Play (8H)",
then
[EP-Extended Play (6H)]
You can record for 6 hours on an unused 4.7 GB disc.
[EP-Extended Play (8H)]
You can record for 8 hours on an unused 4.7 GB disc.

Still Mode (paused video)

Select the type of picture shown when you pause play
(➔ 69, "Frame and field").
Perform step 1 of "Accessing the Setup Menu" (➔ 42).
e , r to select "Video", then q
e , r to select "Still Mode (paused
video)", then
e , r to select "Automatic", "Field" or
"Frame", then
[Field] Select if jittering occurs when "Automatic" is
selected.
[Frame] Select if you cannot see small text or fine
patterns clearly when "Automatic" is selected.

Black Level Control

Select "Normal", "Lighter" or "Darker" to adjust the
black level control to the desired setting for picture
enhancement.
Perform step 1 of "Accessing the Setup Menu" (➔ 42).
e , r to select "Video", then q
e , r to select "Black Level Control",
then
Input Level
Adjusts the black level of the input signal.
After selecting "Black Level Control" (➔ left, step 3).
e , r to select "Input Level", then
e , r to select "Lighter" or "Darker",
then
Output Level (Composite/S Video)
Adjusts the black level of the output signal from the
VIDEO OUT and S VIDEO OUT terminal.
After selecting "Black Level Control" (➔ left, step 3).
e , r to select "Output Level
(Composite/S Video)", then
e , r to select "Lighter " or
"Darker", then

Dynamic Range Compression

(Dolby Digital only)
DVD-V
Change the dynamic range (➔ 69) for easier listening
in low volume.
Perform step 1 of "Accessing the Setup Menu" (➔ 42).
e , r to select "Audio", then q
e , r to select "Dynamic Range
Compression", then
e , r to select "On" or "Off", then

Digital Audio Output

Change the settings when you have connected
equipment through the unit's DIGITAL AUDIO OUT
terminal (➔ 53).
Perform step 1 of "Accessing the Setup Menu" (➔ 42).
e , r to select "Audio", then q
e , r to select "Digital Audio
Output", then
Continued on next page.
45
RQT9048