Table of Contents
Advertisement
EN
BEKO TECHNOLOGIES GMBH
Im Taubental 7
41468 Neuss
GERMANY
Phone: +49 2131 988-0
www.beko-technologies.com
We hereby declare that the products named below comply with the stipulations of the relevant directives and
technical standards. This declaration only refers to products in the condition in which they have been placed into
circulation. Parts which have not been installed by the manufacturer and/or modifications which have been
implemented subsequently remain unconsidered.
Product designation:
Type:
Supply voltage versions:
Max. operating pressure
Product description and function:
Pressure Equipment Directive 2014/68/EU
Applied conformity assessment procedure:
Low Voltage Directive 2014/35/EU
Applied standards:
The devices designed for 24 VDC and 24 VAC supply power are not subject to the requirements laid down in the
European Low Voltage Directive.
EMC Directive 2014/30/EU
Applied standards:
RoHS II Directive 2011/65/EU
The products meet the requirements laid down in European Directive 2011/65/EU concerning the restriction of the
use of certain hazardous substances in electrical and electronic devices.
The manufacturer shall have sole responsibility for issuing this declaration of conformity.
Neuss, 04.08.2016
BEKOMAT
8/9
®
EU Declaration of Conformity
Condensate drain
BEKOMAT
24 VDC, 24 VAC, 100 VAC, 110 VAC, 200 VAC, 230 VAC
10 bar (g) (only BEKOMAT
4 bar (g) (only BEKOMAT
Condensate drain for the electronically level-controlled
discharge of condensate in the compressed-air system fluid
group 2.
Module A: Internal production control, Category I
EN 61010-1: 2010
Section 1-14, 16, 17 Annex A-D, F, G. I-, ZA
EN 61326-1: 2013
Signed for and on behalf of:
BEKO TECHNOLOGIES GMBH
i.V. Christian Riedel
Head of International Quality Management
8 ..., 9 ...
®
8)
®
9)
®
Installation and operation manual
25
Advertisement
Table of Contents
