Table of Contents
Advertisement
Installation and operation manual
1.5. Intended use
The BEKOMAT
is an electronically level-controlled condensate drain for compressed air systems. This product is able to drain
®
condensate from the system components at operating pressure with virtually no pressure loss.
•
It is only suitable for use with original spare parts and accessory parts.
•
The BEKOMAT
8/9 must not be used in areas subject to frost or areas with a potentially explosive atmosphere.
®
•
Permissible media: oil-contaminated or oil-free condensates
The BEKOMAT
may only be operated for the intended purpose and within the specifications stated in the technical data. Do not
®
operate the unit with any substances or gas/vapour mixtures other than those listed above. Any other use of this system, which
exceeds the intended use, is hereby deemed to be improper and can cause a hazard for the safety of people and the environment.
1.6. Legal warranty and liability for property defects
Warranty claims are voided if the BEKOMAT
specified in the technical data. Such uses include (but are not limited to) the following:
•
Technically incorrect installation, incorrect commissioning, incorrect maintenance or incorrect operation
•
Operation with defective components
•
Non-compliance with the instructions in this manual, in particular the safety instructions
•
Execution of constructive interventions or modifications on the device
•
Use of third-party spare parts that have not been approved by the manufacturer for repair and maintenance work
8
is used for a purpose other than the intended use or operated outside the limits
®
EN
BEKOMAT
8/9
®
Advertisement
Table of Contents
