Table of Contents
Advertisement
Setup of a Macintosh Computer
The steps below are for Mac OS 9.0.
Turn on the computer.
1
2
From the Apple menu, select Control Panels.
3
From the Control Panels menu, select TCP/IP.
The TCP/IP dialog box appears.
4
Select Ethernet from the Connect via pop-up menu.
Select Manually from the Configure pop-up menu.
5
6
Enter a local IP address, Subnet mask, Router address and
Name server address for the computer in the appropriate data
field.
≥The Subnet mask is normally entered as "255.255.255.0". If you
intend to access the web screen of the KX-HGW200, you
should make this parameter the same as that of the
KX-HGW200 home side netmask.
≥In the Router address data field, enter "192.168.0.254" (default
local IP address of the KX-HGW200).
≥When you change the local IP address of the KX-HGW200, you
have to change it in the Router address data field also.
For assistance, please call: 1-800-272-7033
"
(Continued ")
55
Advertisement
Table of Contents
