Summary of Contents for Toro Flex-Force Power System 21836
Page 1
Model No. 21836T—Serial No. 321000001 and Up Model No. 21843—Serial No. 321000001 and Up Model No. 21843T—Serial No. 321000001 and Up Model No. 21844—Serial No. 321000001 and Up Model No. 21844T—Serial No. 321000001 and Up *3442-672* Register at www.Toro.com. Original Instructions (EN)
Page 2
1. Model and serial number location on residential properties. It is not designed for cutting brush or for agricultural uses. It is designed to use Toro Flex-Force lithium-ion battery pack Model 81825 (provided with Model 21836), Model 81850 Model No.
Replace any damaged or unreadable labels. Use only the battery pack specified by Toro. Using other accessories and attachments may increase the risk of injury and fire. Plugging the battery charger into an outlet that is not 100 to 240 V can cause a fire or electric shock.
Page 4
Charge the battery pack with only the battery the influence of alcohol or drugs. charger specified by Toro. A charger suitable for Operate the machine only in good visibility and 1 type of battery pack may create a risk of fire when used with another battery pack.
Other battery pack above 68°C (154°F) or incinerate replacement parts and accessories could be it. Replace the battery pack with a genuine Toro dangerous, and such use could void the product battery pack only; using another type of battery warranty.
Page 6
Model 81825 decal134-4550 134-4550 1. Warning—read the 4. Thrown object Operator's Manual. hazard—keep bystanders away; shut off the engine before leaving the operating position; pick up any debris before mowing. 2. Cutting/dismemberment 5. Cutting/dismemberment hazard of hand, mower hazard of hand or foot, blade—stay away from mower blade—do not moving parts;...
Page 7
Model 81850 decal140-2158 140-2158 1. Read the Operator’s 4. Do not expose to flame. Manual. 2. Recycle the battery 5. Do not expose to rain. properly. 3. Do not discard. decal137-9495 137-9495 1. Read the Operator’s Manual. 3. For indoor use. 2.
Setup Important: The battery pack is not fully charged when it is purchased. Before using the machine for the first time, refer to Charging the Battery Pack (page 18). Note: The safety key and all other loose parts have been placed in the battery compartment for safe delivery; ensure that you remove them from the compartment and store them in a safe place prior to assembly.
Pull the handlebar release brace toward the upper handle to release the handle lock (Figure Move the handle rearward to the operating Assembling the Handle position and let go of the handlebar release brace (Figure Note: Ensure that the handle clicks into place. Parts needed for this procedure: Upper handle assembly Bolt...
Specifications Product Overview Model Weight Length Width Height (without a battery) 20.2 kg 130.6 cm 41.7 cm 107.3 cm 21836/T (44.5 lb) (51.4 (16.4 (42.2 inches) inches) inches) 22.1 kg 136.2 cm 48.5 cm 108.5 cm 21843/T (48.7 lb) (53.6 (19.1 (42.7 inches)
Operation Note: Determine the left and right sides of the machine from the normal operating position. Before Operation Installing the Battery Pack Important: Operate the battery pack only in temperatures that are within the appropriate range; refer Specifications (page 10). Ensure that the safety key is not installed to the machine.
Adjusting the Cutting The height of cut is adjustable in 6 increments between 19 mm (3/4 inch) and 70 mm (2-3/4 inches). Height Indicator Height of Cut Position 1 (lowest) WARNING Adjusting the height-of-cut could bring your hands into contact with a moving blade and result in serious injury.
Using the Self-Propel Drive During Operation Model 21844/T Only Starting the Machine • To adjust the self-propel movement speed, adjust the speed control (Figure 12). Ensure that the battery pack is charged and installed in the machine; refer to Installing the •...
Recycling the Clippings Your machine comes from the factory ready to recycle the grass and leaf clippings back into the lawn. If the grass box is on the machine, remove it before recycling the clippings. Refer to Removing the Grass Box (page 16).
Bagging the Clippings Use the grass box when you want to collect grass and leaf clippings from the lawn. If the mulch plug is on the machine, remove it before bagging the clippings. Refer to Removing the Mulch Plug (page 14).
Page 16
Removing the Grass Box To remove the box, reverse the steps in Installing the Grass Box (page 15). Do not operate the machine with the grass box removed unless the mulch plug is installed. Remove the grass box only when mulching, transporting the machine, storing the machine, or emptying the grass box (Figure 16).
Shutting Off the Machine Removing the Battery Pack from the Machine Release the blade-control bar (Figure 10). Lift up the battery-compartment lid. Press the battery-pack latch to release the battery pack and remove the battery pack. Close the battery-compartment lid. g341360 Figure 19 g341392...
Before using the tool for • For best performance, install a new Toro blade the first time, place the battery pack in the charger before the cutting season begins or when and charge it until the LED display indicates the necessary.
Folding the Handle Refer to the following table to interpret the LED indicator light on the battery charger. Indicator Indicates WARNING light Folding or unfolding the handle improperly No battery pack inserted can damage the cables, causing an unsafe Green Battery pack is charging operating condition.
Storing the Machine in the Note: You can hook the grass box onto the handlebar release brace in this position (Figure Vertical-Stow Position 23). You can store your machine in the vertical position to minimize storage space. WARNING Folding or unfolding the handle improperly can damage the cables, causing an unsafe operating condition.
Maintenance Remove the safety key and battery pack from the machine before maintaining or cleaning the machine. Use only the manufacturer’s recommended replacement parts and accessories. Inspect and maintain the machine regularly. Have the machine repaired only by an Authorized Service Dealer.
If you are storing the battery pack for the off-season, charge it until 2 or 3 LED Contact your local municipality or your authorized Toro indicators turn green on the battery. Do not store distributor for more information on how to responsibly a fully charged or fully depleted battery.
Troubleshooting Perform only the steps described in these instructions. All further inspection, maintenance, and repair work must be performed by an authorized service center or a similarly qualified specialist if you cannot solve the problem yourself. Problem Possible Cause Corrective Action The machine does not start.
Page 24
Problem Possible Cause Corrective Action The LED indicator light on the battery 1. There is an error in the communication 1. Remove the battery pack from the charger is blinking red. between the battery pack and the battery charger, unplug the battery charger.
Page 27
The Toro Company (“Toro”) respects your privacy. When you purchase our products, we may collect certain personal information about you, either directly from you or through your local Toro company or dealer. Toro uses this information to fulfil contractual obligations - such as to register your warranty, process your warranty claim or to contact you in the event of a product recall - and for legitimate business purposes - such as to gauge customer satisfaction, improve our products or provide you with product information which may be of interest.