Transmission Service; Transmission Removal / Service Notes; Transfer Case Disassembly - Polaris RZR 800 2013 Manual

TRANSMISSION
7. Start engine and shift through all gears to ensure the
shift cable is properly adjusted. If transmission still
ratchets after cable adjustment, check the CVT
system for belt movement at idle. If difficulty shifting
persists, the transmission may require service.
8.4

TRANSMISSION SERVICE

Transmission Removal / Service Notes

The engine, transmission and rear differential are bolted
together as a unit. Removal of the transmission is not
possible without removing the engine and differential.
The shift housing cannot be removed without first
disassembling the transfer case.
NOTE: Refer to the "Engine Removal" section in
Chapter 3 to remove the engine and drivetrain.

Transfer Case Disassembly

IMPORTANT: Shift housing repairs are not possible
without performing transfer case disassembly. Read
and understand all instructions before beginning
disassembly.
NOTE: Exploded views are located at the end of this
chapter for additional information.
1. Place the transmission in the neutral position.
2. Drain both the transfer case and transmission case
halves.
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.