Parts And Their Functions; Front Panel 1 - Panasonic AK-HRP250G Operating Instructions Manual

Parts and their functions

Front panel 1

1 [HEAD PW/VF PW] button
2 [IRIS CLOSE] button
3 [BARS/TEST] button
4 [AUTO WHITE] button
5 [AUTO BLACK] button
6 [AUTO SET UP] button
7 [5600K] button
8 [MATRIX] button
9 [SKIN DTL] button
10 [KNEE OFF] button
11 [DTL OFF] button
12 [SHUTTER ON] (STEP/SYNC)
button
13 [SHIFT] button
14 [1]/[2]/[3]/[4] (SCENE/USER
FILE) buttons
15 [STORE] button
2 3 4
1
7
8
9
13 14
Use this button to control camera power remotely. However, it will not function unless the CCU
and the camera are turned on.
Press the [SHIFT] button and then press the [HEAD PW/VF PW] button to control the view-
finder power remotely.
Use this button to forcibly set the iris to CLOSE (closed).
Use this button to output the CCU color bar signal from the camera video output on the CCU
rear panel.
Use this button to perform auto white balance adjustment.
Use this button to perform auto black balance adjustment.
Use this button to start auto setup.
Use this button to set the color temperature to 5600K.
Use this button to enable the function to correct saturation and color phase according to the
gain setting of each color component in matrix memory.
Use this button to apply coring to the detail enhancement of the skin tone areas in the video
output to soften or increase the enhancement of skin tone details.
Use this button to set the knee function to on or off.
Use this button to set the detail effect to on or off.
Turns the shutter on or off.
Press and hold this button to switch between the step shutter and sync shutter.
Use this button to switch the function of another button. When the button is pressed to turn on
the button, you can operate the function of any button with the label printed in amber.
Use these buttons to recall the corresponding scene files as necessary.
Press the [SHIFT] button and then press any of the [1] to [4] buttons to recall a user file or ref-
erence file.
Use this button to register scene files.
Press the [SHIFT] button and then press the [STORE] button to save a user file to a number
specified with any of the [1] to [3] buttons.
- 21 -
5 6
12
11
10
15
Parts and their functions