Front Panel 3 - Panasonic AK-HRP250G Operating Instructions Manual

Front panel 2
1 [BLACK/FLARE] (PAINT
ACTIVE) button
2 [GAIN] dials (red and blue)
3 [DTL] dial
4 [BLACK/FLARE] dials (red and
blue)

Front panel 3

1 [ND] indicator
2 [CC] indicator
3 [SHT] indicator
4 [SYNC] indicator
5
[M.GAIN] indicator
6
[M.PED] indicator
7
[UP/DOWN] buttons
8
Adjustment value display
9
[IRIS] indicator
10 [ND/CC] (SAVE) button
1 2
3 4
Short press this button to switch the function of the [BLACK/FLARE] dials.
Press and hold this button to disable the functions of the [GAIN] dials, [BLACK/FLARE] dials,
and [DTL] dial (button off).
Use these dials to adjust the white balance (red and blue).
Use this dial to adjust the detail level.
Use these dials to adjust the pedestal (red and blue) or flare (red and blue).
Select which adjustment to perform with the [BLACK/FLARE] (PAINT ACTIVE) button.
7 5 1 2 3 4
8
16
10 11 12
17
This indicator is lit when the ND filter adjustment value is displayed on the adjustment value dis-
play.
This indicator is lit when the CC filter adjustment value is displayed on the adjustment value dis-
play.
This indicator is lit when the shutter speed setting value is displayed on the adjustment value
display.
This indicator is lit when the sync shutter setting value is displayed on the adjustment value dis-
play.
This indicator is lit when the master gain adjustment value is displayed on the adjustment value
display.
This indicator is lit when the master pedestal adjustment value is displayed on the adjustment
value display.
Use the [UP/DOWN] buttons to select the setting displayed on the adjustment value display.
This display shows an adjustment value or setting value.
This indicator is lit when the iris value is displayed on the adjustment value display.
Use this button to switch the operation target to the ND filter or CC filter and display the value
on the adjustment value display.
Press and hold this button to turn filter control on the camera on or off.
Press the [SHIFT] button and then press the [ND/CC] (SAVE) button (lights amber) to display
the SAVE menu for saving the settings of the unit to a memory card.
- 22 -
6 9
13
14
15
Parts and their functions