Siemens 8DA Installation Instructions Manual page 31

Fig. 22: Desiccant bags in the gas compartments (position identified in the illustration by black squares; on the switchgear,
with the inscription "Filter" on the outside)
Item no. Designation
a
Busbar housing, left end panel
s Busbar housing, with post insulator
d
Busbar housing, general type with "Filter" inscription on the cover
f
Busbar housing, left-hand panel of bus sectionaliser
g
Busbar housing, right-hand panel of bus sectionaliser
h
Busbar housing, right end panel
j
Bus riser housing of bus sectionaliser
k
Connection housing of bus sectionaliser
l
Circuit-breaker housing, left-hand panel of bus sectionaliser
;
Circuit-breaker housing, general type
=USNJVOTPKV=G=fkpq^iiqflk=fkpqor`qflkp=Ua^=G=oÉîáëáçå=MP
Preparing the busbar run for filling gas
NOTE!
;
If the circuit-breaker housing
l
sing of the bus sectionaliser
of a bus sectionaliser is mounted in the right-hand panel, the connection hou-
is located in the left-hand panel.
fåëí~ää~íáçå
Desiccant bags
2 x 250 g
1 x 450 g
2 x 250 g
2 x 250 g
2 x 250 g
2 x 250 g
2 x 250 g
2 x 250 g
2 x 250 g
2 x 250 g
31