Configuration; Initial Connection To The Router; Connect Via Ethernet Cables - D-Link AC1200 User Manual

Section 3 - Configuration

Configuration

This section shows you how to configure your new DWR-960 using the configuration utility that can be accessed via your web browser.

Initial Connection to the Router

By default, the DWR-960 comes configured to work with most 4G SIM/UICC cards. If you wish to configure the router, you will need to establish a
direct connection with the router in order to access the web-based configuration utility. Refer to the following two sections for wired and wireless
connection methods. Once you have configured your router, you will be able to connect to a wireless network using the Wi-Fi settings that you
specified in the configuration process.

Connect via Ethernet Cables

If you are configuring the router from a PC with a wired Ethernet connection, plug one end of an Ethernet cable into the port labelled LAN on the
back of the router, and the other end into the Ethernet port on your computer.
D-Link DWR-960 User Manual 9