D-Link AC1200 User Manual page 34

Section 3 - Configuration
Wi-Fi WPS
PBC Push Button Configuration (PBC) enables you to easily
connect your devices to the DWR-960 by pushing a PBC
button on both devices. This mechanism is referred to
as WPS (Wi-Fi Protected Setup). Click Start Via PBC, to
begin the WPS process. This button works in the same
manner as the WPS button on the bottom of the device.
Refer to WPS Button on page 54 for more information.
Select the wireless band first for WPS setting.
Band
Use PIN Mode
Use toggle to enable PIN protection for use with the
WPS feature.
Note: WPS PIN Mode is disabled by default. This mode is
less secure and is not recommended. It is retained in this
product for compatibility purposes only.
PIN The PIN is a unique number that can be used on
devices that do not have a WPS button. Click Generate
New to generate a new random PIN, or select Use
Default to restore the factory PIN. Note that if the
WPS PIN feature is enabled, using a new PIN is strongly
recommended.
To use this feature:
1. Click the Start Via PIN to start the WPS process.
2. Follow the user manual of the client device for
D-Link DWR-960 User Manual
entering the PIN for WPS. On Windows 7, select
the network name you want to connect, then you
will be prompted to enter the PIN.
30