Dhcp Settings - D-Link AC1200 User Manual

Section 3 - Configuration
Here you can disable or enable your router's DHCP service, configure the IP address for the DWR-960, and set the range of IP addresses assigned
by the DHCP server.
DHCP Service
DHCP Service Enable or disable the DHCP Service.
IP Address Click on the last digit to alter your router's current LAN
IP address. Note that if you change this setting, you will
need to enter this new IP address into your browser to
access to the configuration utility.
Subnet Mask
The subnet mask of the LAN interface.
IP Range
Click on the last digit to configure the range of IP
addresses assigned by the DHCP server.
Click Apply to save your changes.
D-Link DWR-960 User Manual

DHCP Settings

33