3 Development Platform Quick Start; Tools Setup Sequence; Open Project And Start Debug - Fujitsu F2MC-8FX Series Setup Manual

3 Development Platform Quick Start

3.1 Tools Setup Sequence

Start the debugging system in the following sequence:
Connect a BGMA to the PC using a USB cable, confirm the LED on the BGMA is Green;
Connect an EV board to BGMA IDC10 socket;
Power on EV board power supply, confirm the LED on the BGMA is orange.

3.2 Open Project and Start Debug

Users can start a debug from a PC software SOFTUNE workbench in the following
sequence. Here take IO_TEST project as example.
Start the SOFTUNE by selecting Programs > SOFTUNE V3 > FFMC-8L Family
SOFTUNE Workbench from Start Menu;
Click Open workspace from File Menu in SOFTUNE;
Select IO_TEST.wsp in Open Space window;
Click Start debug from Debug Menu.
If the entire procedure goes right, a debug will start normally.
EV BOARD MB2146-441-E V1.0
Chapter 3 Development Platform Quick Start
MCU-AN-500092-E-10 – Page 13