Advertisement
Mode and Function Description
TURBO mode (5)
Press the TURBO button to start or stop fast cooling.
Appliance is operating under super high fan speed and
indicator is flickering all the time.
You can change the fan speed by pressing FAN SPEED
button.
FAN ONLY mode (6)
Press the FAN ONLY button to start or stop fan
operation. Fan speed and louver direction can be
adjusted
Note: This function can only be activated under the
appliance at off status.
RESET function
If remote controller shows error code or can not be
used, press this button by using a pin to let the remote
control back to default settings.
LOCK function
Press the button by using a pin to lock all the other
buttons on remote controller. Press again to unlock it.
17
Advertisement
