Installation - Silvercrest 368308 2010 Manual

Wait a moment while the device prepares itself for
installation� As soon as the device is ready for in-
stallation
8.

Installation

Caution! Risk of burns through
hot radiator valve! Contact could
lead to hands being burned�
▸ Allow the radiator to cool down
before completing any installation,
disassembly or repair work on the
device!
▸ Wear work gloves!
Installation of the device is easy� It is not necessary
to drain the heating water or alter the heating sys-
tem� It is not necessary to use any special tools or
switch off the heating system.
The union nut (1) permanently attached to the de-
vice fits on all radiator valves of the most common
manufacturers with thread size M30 x 1�5 mm, e�g�
Heimeier, MNG, Junkers, Landis+Gyr (Duodyr),
Honeywell-Braukmann, Oventrop type A, Oven-
trop AV6, Schlösser, Comap D805, Valf, Sanayii,
Mertik Maxitrol, Watts, Wingenroth (Wiroflex)
R�B�M, Tiemme, Jaga, Siemens, Idmar�
The adapters (14) contained in the supply package
enable the device to be fitted to Danfoss RA, Dan-
foss RAV and Danfoss RAVL radiator valves.
appears in the display�
45
Gi