Changing Location Accuracy; Backlog; Enabling Or Disabling Backlog; Viewing Backlog Reports - Motorola MXP600 Feature User Manual

30.4

Changing Location Accuracy

NOTE: The accuracy of the Global Positioning System (GPS) or Global Navigation Satellite
System (GNSS) Location Service depend on the coverage and selected accuracy mode.
Procedure:
1 From the home screen, press the Menu key.
2 Select Location→Accuracy.
3 Select one of the following options:
Option
Medium
High
NOTE: Medium is the default mode. If your radio is connected to an external charging
device, your radio automatically enters the High mode.
30.5

Backlog

Backlog sub-menu allows you to enable or disable, view, and delete backlog reports.
NOTE: The backlog of location reports is only available when Local Information Protocol (LIP) is
enabled.
30.5.1

Enabling or Disabling Backlog

Procedure:
1 From the home screen, press the Menu key.
2 Select Location→Backlog→Enablement.
3 Select one of the following options:
Option
On
Off
30.5.2

Viewing Backlog Reports

Procedure:
1 From the home screen, press the Menu key.
2 Select Location→Backlog→Reports.
The display shows the number of backlog reports that are stored.
Description
To optimize power consumption but with less accurate
positioning.
To have more accurate positioning but with more power
consumption.
Description
To enable recording the location report backlog.
To disable recording the location report backlog.
MN006360A01-AE
Chapter 30: Location
153