Cleaning; Storing The Device When Not In Use - Silvercrest SLL 16 C1 Operating Instructions And Safety Instructions

SilverCrest SLL 16 C1
•
If a 3.5 mm cable is plugged into the AUX IN jack (7), remove it,
because the Bluetooth
in.
•
Make sure that a previously paired connection with another
®
Bluetooth
connection and reconnect to the desired audio source.
No sound
•
Increase the volume of the speaker. In AUX IN mode, increasing the
volume on your playback device can also solve the problem.
You notice limitations in functionality
•
This problem may be related to the software of your Bluetooth
device not being up to date. If necessary, try to update the software
version. Please consult the operating manual of your Bluetooth
device.

11. Cleaning

•
Do not allow moisture to enter the speaker or the connection socket.
Keep the appliance lid (9) closed during cleaning.
•
Clean the speaker with a slightly damp, soft cloth only.
•
Do not use abrasive, scouring or solvent-based cleaning agents. The
surfaces of the speaker can be irreparably damaged.

12. Storing the device when not in use

Store the speaker in a dry, clean location away from direct sunlight.
Recharge the integrated battery from time to time to extend its service
life.
48 - English
®
feature does not work if a cable is plugged
device is no longer active. If necessary, disconnect the
®
®