Canon Creative Park Nikko Toshogu Shrine Yomeimon Assembly Instructions Manual page 11

Nikko Toshogu Shrine (Yomeimon) : Assembly Instructions
17B
17C
Assembling the area between the second floor and the roof
Use the 16th to 18th pages of the parts sheet.
Before attaching 15A (16A)-15E (16E), fold them along the fold lines.
When attaching the parts to 17B, start from the outer side 15A (16A) to the inner side 15E (16E).
Attaching the parts will be easy if you attach them after connecting them into a box-shape.
*It will be easier if you assemble 17B after attaching 15A (16A)-15E (16E).
After attaching the parts to 13B, start attaching the strip-like parts to the inner-side parts. As for the strips that end up in the corners, attach them
to each other as shown on page 9.
Attach the glue tabs of 15E (16E) to 17A. Then, attach engravings 15F (16F) and 15G (16G) to the corresponding glue tabs of 15C (16C) and 15D (16D).
Attach 15H (16H) to 15B (16B) and to the glue tabs on the corners of 15C (16C).
Assemble 17B and attach 17C.
PAGE11
View from the back side
15A(16A)
15B(16B)
15E(16E)
15C(16C)
15D(16D)
15D(16D)
15C(16C)
15B(16B)
15E(16E)
15A(16A)
To 17B
17A
15H(16H)
Attach it in
four places.