Bts3900 Commissioning Prerequisites; Bts3900 Commissioning Resources; Table 2-1 Tools And Instruments Required For The Commissioning - Huawei BTS3900 GSM Commissioning Manual

2 General Requirements for BTS3900 Commissioning

2.1 BTS3900 Commissioning Prerequisites

Before the commissioning, you must check the operating status of the BTS3900 and that of the
BSC.
Hardware Requirements
l
l
l
l
Software Requirements
l

2.2 BTS3900 Commissioning Resources

Before the commissioning, you must arrange for the tools, obtain the information about the
BTS3900, and download the correct software for the boards in the BTS3900.
Tool
Table 2-1

Table 2-1 Tools and instruments required for the commissioning

Tool
Computer
Multimeter
Power meter
Site master
Drive tester (such as TEMS
or ANT)
2-2
The BTS3900 cabinet is installed and the cables are connected.
The BTS3900 has passed the hardware installation check before it is powered on.
The BTS3900 is powered on. For details, refer to
BTS3900 Cabinet and
The BSC is installed. The system commissioning is complete, and the system is running
normally.
The data of the BTS3900 is configured on the BSC side.
lists the tools and instruments required for the commissioning.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Checking the Power-On Status of the BTS3900
Qua Description
ntity
One Mandatory. For details on the configuration, refer to
Configuration Requirements for the Site
Maintenance Terminal
For details on how to install and use the Site
Maintenance Terminal application, refer to the
BTS3900 GSM Site Maintenance Terminal User
Guide.
One Mandatory
One Mandatory. The power meter is used to measure the
output power of the TRX.
One Mandatory. The site master is used to measure the
voltage standing wave ratio (VSWR).
One Optional. The drive tester is used to measure whether
the antenna system is properly connected.
Commissioning Guide
Checking the Power-On Status of the
PC.
Issue 03 (2008-07-15)
BTS3900 GSM
Components.