Table of Contents
Advertisement
You can adjust the followings for each image mode. For detailed information on the proce-
dures, refer to "Image Adjustment Menu" (P89 to 95).
-
Brightness Adjust this when the image is too bright or dark.
-
Contrast
Adjust this to decrease or increase contrast of the entire image.
-
Sharpness Adjust this to soften or sharpen an image.
-
Gamma
Adjust this when light or dark portions of an image are obscure.
-
Color adjustment
Adjust this to adjust the color level and balance.
-
Advanced adjustment
Adjust this when color tones are different from those of the original image.
The results of adjustments are saved for each input signal. Once you save them, you can
project images with the same settings.
You can set an image mode from the menu. Refer to [Image mode] section in the menu
(P89)
51
Advertisement
Table of Contents
