Adapter Information Special Register (0X1100, 4352); Adapter Setting Special Register (0X1600, 5632) - Hitachi HX-RIO3 Series User Manual

53
A.4.4. Adapter Information Special Register (0x1100, 4352)
Address
0x1102(4354)
0x1103(4355)
0x1104(4356)
0x1105(4357)
0x1106(4358)
0x1107(4359)
0x1108(4360)
0x1109(4361)
0x110D(4365)
0x110E(4366)
0x1110(4368)
0x1113(4371)
0x111E(4382)
* After the system is reset, the new "Set Value" action is applied.
* If the slot location is changed, set default value automatically (all expansion slots are live).
A.4.5. Adapter Setting Special Register (0x1600, 5632)
Address
0x1600(5632)
0x1602(5634)
0x1604(5636)
0x1606(5638)
0x1607(5639)
0x1608(5640)
0x1609(5641)
0x160A(5642)
Access Type, Size
Read 1word
Read 1word
Read 1word
Read 1word
Read 1word
Read 1word
Read 1word
Read 1word
Read/Write 1word
Up to
Read
64 words
Read 1word
Up to
Read
64 words
Read 1word
Access Type, Size
Read 2words
Read 2words
Read 2words
Read/Write 1word
Read/Write 1word
Read/Write 1word
Read/Write 1word
Read/Write 1word
Description
Start address of input image word register. =0x0000
Start address of output image word register. =0x0800
Size of input image word register.
Size of output image word register.
Start address of input image bit. = 0x0000
Start address of output image bit. =0x1000
Size of input image bit.
Size of output image bit.
Field Power On/OFF, Run/Stop Switch, Reset Switch
*Field Power On : 0x8010 / Field Power Off : 0x0000
*Stop : 0x0000 / Run : 0x0001 / Reset Switch : 0x0002
ex) 0x8013 : Field Power On + Run + Reset Switch ON
Expansion slot's GT-number
If the PIO is connected with GT-222F and GT-123F, then
0x222F 0x123F
Number of expansion slot
Expansion slot Module Id. Refer to Appendix A.1 Product
List. First 1word is adapter's module id.
Reserved. Adapter IO identification vendor code.
Description
IP Address. (ex : C0A8 6464 = 192.168.100.100)
Subnet Mask. (ex : FFFF FF00 = 255.255.255.0)
Gate way. (ex : C0A8 0001 = 192.168.0.1)
RS-232 Baudrate. (2400bps~115200bps)
0 : 115200(Default) 1 : 2400
4 : 19200 5 : 38400 6 : 57600 7 : 115200
RS-232 Setting.
- 1 nibble : Data bit(0 : 8bit(default), 1 : 9bit)
- 2 nibble : Stop bit(0 : 1bit(default), 1 : 2bit)
- 3 nibble : Parity bit(0 : none(default), 1: odd, 2 : even)
- 4 nibble : Reserve
RS-485 Baudrate. (2400bps~115200bps)
0 : 115200(Default) 1 : 2400
4 : 19200 5 : 38400 6 : 57600 7 : 115200
RS-485 Setting.
- 1 nibble : Data bit(0 : 8bit(default), 1 : 9bit)
- 2 nibble : Stop bit(0 : 1bit(default), 1 : 2bit)
- 3 nibble : Parity bit(0 : none(default), 1: odd, 2 : even)
- 4 nibble : Reserve
MODBUS Station.
- High 1byte : Station No. of RS-232C (default : 1)
HX-RIO3 Series
2 : 4800 3 : 9600
2 : 4800 3 : 9600