Hitachi HX-RIO3 Series User Manual page 56

56
Address
Access
Offset
+ 0x00(+0) Read
+ 0x02(+2) ** Read
+ 0x03(+3) ** Read
+ 0x04(+4) ** Read
+ 0x05(+5) ** Read
+ 0x06(+6) ** Read
+ 0x07(+7) ** Read
+ 0x08(+8) ** Read
+ 0x09(+9) ** Read
+ 0x0A(+10)** Read
+ 0x0B(+11)** Read/Write
+ 0x0E(+14) Read
+ 0x0F(+15) Read
+ 0x10(+16) Read
+ 0x11(+17)** Read/Write
+ 0x17(+23) Read
+ 0x18(+24) Read
+ 0x19(+25) Read
+ 0x1A(+26) 0x201A(8218)
+ 0x1B(+27) 0x201B(8219)
+ 0x1C(+28) 0x201C(8220)
+ 0x1D(+29) 0x201D(8221)
+ 0x1E(+30) 0x201E(8222)
+ 0x1F(+31) 0x201F(8223)
* After the system is reset, the new "Set Value" action is applied.
** Nothing of output, input, and memory or configuration parameter corresponding slot returns Exception 02.
*** Slot Configuration parameter saved by internal EEPROM during power cycle until slot position changed.
*** All of output modules and special modules have the slot configuration parameter data. Refer to Document.
(RIO3_Configuration_Parameter_Memory_Register_Rev1.01)
IO Data Code Format (1 word)
•
Item #15 #14
Field Output IO code
Field Date Type
Example)
ST-3214 0 0
ST-1224 0 0
ST-1228 0 0
Type,
Description
Size
1word Slot module id. Refer to Appendix A.1 Product List.
1word Input start register address of input image word this slot.
Input word's bit offset of input image word this slot.
1word
1word Output start register address of output image word this slot.
Output word's bit offset of output image word this slot.
1word
1word Input bit start address of input image bit this slot.
1word Output bit start address of output image bit this slot.
1word Size of input bit this slot
1word Size of output bit this slot
n words Read input data this slot
n words Read/write output data this slot
1word GT-number, if GT-22CA, returns 0x22CA
First 1word is length of valid character string.
If GT-22CA, returns
"00 1C 47 54 2D 32 32 43 41 2C 20 33 32 44 4F 2C 20 32 34
String
Up to 56 64 63 2C
20 53 6F 75 72 63 65 "
72bytes
Valid character size = 0x001E =30 characters,
"GT-22CA, 32DO, 24Vdc, Source"
1word Size of configuration parameter byte
n words Read/write Configuration parameter data, up to 8byte. ***
1word Firmware Revision
1word Expansion Module Revision
2word Firmware release data
0x203A(8250)
0x203B(8251)
0x203C(8252)
0x203D(8253)
0x203E(8254)
0x203F(8255)
#13 #12 #11 #10 #9
Data Length
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
.......
0x205A(8282)
.......
0x205B(8283)
.......
0x205C(8284)
.......
0x205D(8285)
.......
0x205E(8286)
.......
0x205F(8287)
#8 #7 #6 #5
Input IO code
Date Type Data Length
0 1 0 0
0 1 1 0
0 0 1 0
HX-RIO3 Series
0x27BA(9146) 0x27DA(9178)
0x27BB(9147) 0x27DB(9179)
0x27BC(9148) 0x27DC(9180)
0x27BD(9149) 0x27DD(9181)
0x27BE(9150) 0x27DE(9182)
0x23BF(9151) 0x27DF(9183)
#4 #3 #2 #1 #0
0 0 1 0 0
0 0 1 0 0
0 0 0 0 1
Word
0x0084
0x00C4
0x0041