Heat pump model setup
The pump can be chosen on 3 levels of precision:
1. The precise name of the pump: the manufacturer and the model.
This is recommended for the most efficient operation.
2. Pump manufacturer.
If you only choose the pump manufacturer, functions T8 will not be
checked and the command will be sent even if the pump does not have
T8 mode. If the exact pump model is not listed on our webpage or in this
manual, Combi Control may or may not work with the heat pump, for which
the Combi Control manufacturer will not be held responsible.
3. All pump models.
If you choose All pump models (SMS: "950"), then all supported brands
IR commands will be sent to the pump, and Combi Control can be used
without choosing the pump more precisely.
30