Table of Contents
Advertisement
3.
Hang the device on the wall by aligning
the key holes with the mounted screws.
Figure 8
*Before hanging the device on the wall or ceiling, please
secure the HDD tray with the provided screw and make
sure the tray opening is facing upwards to prevent it
from falling out accidentally.
Mounting in an EIA standard size
19-inch rack
1.
Attach the L-shaped mounting brackets
to each side of the chassis as shown in
Figure 9 and secure them with the screws
provided.
Figure 9: Attaching the Rack Mount Brackets
DNH-200 Quick Installation Guide
2.
Mount the device in the rack using
a screwdriver and the supplied rack-
mounting screws.
Figure 10: Installing in the Rack
Connecting Power
The power adapter
2
is shipped with the device.
Connect the power connector of the adapter
to the power input on the DNH-200 back
panel, and plug the adapter into a nearby AC
power source.
1
User can find a mouting kit in the package. The screw diameter is
1.8mm±0.15 and its length is 16mm±0.7. The direction of power plug can
be placed on a upside or downside for user's requirement.
2
The power adapter is 12V/3A.
5
Advertisement
Table of Contents
