Sealey TC965.V2 Quick Start Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear protective
instruction gloves
manual
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this
‰
equipment. Under Health and Safety Law, Employers and Self Employed Personnel have a legal duty to ensure Safe Working
Conditions for all employees and personnel that may come into contact with this equipment. In particular they must carry out a specific
risk and hazard assessment in the workplace to eliminate or reduce any risk found and must record, update and retain records of the
results of this inspection.
Familiarise yourself with the applications, limitations and any possible or potential hazards of the tyre changer.
9
Maintain the tyre changer in good condition (use an authorised service agent).
9
Replace or repair damaged parts. Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
9
WARNING! Check regularly for damaged parts. Any part that is damaged must be repaired or replaced before the equipment is next
‰
used. Locate the tyre changer in a suitable work area, keep area clean and tidy and free from unrelated materials. Ensure that there is
adequate lighting.
WARNING! Use on a level surface, preferably concrete, to which the tyre changer must be bolted.
‰
Keep the tyre changer clean for best and safest performance.
9
Wear approved safety eye protection (standard spectacles are not adequate).
9
Keep hands and feet well clear of the bead breaker.
9
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip safety shoes.
9
Remove ill fitting clothing. Remove ties, watches, rings, and other loose jewellery and contain and/or tie back long hair.
9
Keep children and unauthorised persons away from the work area.
9
DO NOT use the tyre changer for any purpose other than that for which it is designed.
8
DO NOT operate the tyre changer if any parts are damaged or missing as this may cause failure and/or personal injury.
8
DO NOT allow untrained persons to operate the tyre changer.
8
DO NOT stand on the tyre changer.
8
DO NOT operate the tyre changer when you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
2. INTRODUCTION
Manual type tyre changer suitable for a wide variety of tyres and wheels including those fitted to motorcycles, ATVs, go-karts and golf buggies.
Works on bearing or hub centred wheels and is supplied with two centre posts. Includes manual bead breaker and supplied with tyre bar for
mounting and de-mounting. Fast and simple operation. To prevent damage to the rims of alloy wheels, use optional Tyre Bar, Model No. TC963.
3. SPECIFICATION
Model No: .............................................................. TC965.V2
Centre Post Sizes: ...................................Ø12, 16, 19, 24mm
Optional Accessories:
.................................TC963 - Tyre Bar for Aluminium Wheels
Wheel Depth Minimum/Maximum:........................... 0/280mm
Working Diameter Minimum/Maximum: ..................................
......................................................... Ø102mm/Ø524mm(21")
© Jack Sealey Limited
MOTORCYCLE & MINI TYRE CHANGER
MODEL NO:
Wear eye
protection
Original Language Version
TC965.V2
TC965.V2 Issue:2 (H,F) 10/11/21