Philips Selecon Fresco Operation Manual

Philips Selecon Fresco LED Wall Washer
**OPERATION MANUAL**
THIS INFORMATION IS DESIGNED TO PROVIDE YOU WITH THE INFORMATION
YOU NEED IMMEDIATELY UPON DELIVERY OF YOUR NEW LUMINAIRE.
If you require further assistance please contact your Philips Selecon dealer. www.seleconlight.com/distributors
Philips Selecon has packaged this product using environmentally friendly packaging. Please consider either
reuse of the packaging or dispose of responsibly with your nearest recycling collection agency.
IMPORTANT!
Read this manual carefully before attempting to install, operate or maintain the Fresco LED Wall Washer. Follow the instructions in this
manual. Philips Selecon accepts no responsibility if the customer fails to do so.
For each customer, operating conditions will vary, sometimes greatly. Such variations may affect the luminaire's performance. Philips
Selecon has no control over the customer's unique operating environment. Hence, Philips Selecon makes no representations or warranties
concerning the luminaire's performance under the customer's actual operating conditions. All operating parameters must be validated for
each customer application by the customer's technical experts.
KEY OPERATING POINTS AND FEATURES
A: Pan lock with and Allen key lock-off, accessible at any angle
B: Two tilt locks with reference scale and Allen key lock-off,
allowing lock-off at any angle
C: Dimming control for local dim option
D: Integrated heatsink allows passive cooling
E: Fasteners included for easy barndoor accessory mounting
PAN TILT ADJUSTMENT
WARRANTY REGISTRATION:
Take full advantage of the Philips Selecon service commitment and register all
your new luminaires quickly and easily online for full after-sales support.
Adjusting the pan angle
Release the set screw at the top
of the unit (as shown) and adjust
accordingly. Re-lock after
adjustment.
Adjusting the tilt angle
The tilt can be adjusted by
unlocking the visible set screw,
located as shown. Re-lock after
adjustment.
JULY 2013 © 2013 Philips Selecon All Rights Reserved
www.seleconlight.com/warrantyreg
E
B
Mounting the barn door accessory
Undo the two cap screws in the front of
the unit. Place the barn door on to the
unit, as shown, and do up the cap
screws securely.
B
A
D
C