Table of Contents
Advertisement
CARE AND CLEANING
ELECTRICAL SHOCK HAZARD
ALWAYS BE SURE TO UNPLUG
MIXER BEFORE CLEANING TO AVOID
POSSIBLE ELECTRICAL SHOCK.
Wipe mixer with a damp cloth. DO
NOT IMMERSE IN WATER. Wipe off
beater shaft frequently, removing any
residue that may accumulate.
TROUBLESHOOTING
PROBLEM
Please read the following before
calling your service centre:
If your Stand Mixer should
malfunction or fail to operate,
please check the following:
How To Obtain Service:
*Included with select models only. Also available as an optional accessory.
KITCHENAID and the design of the stand mixer are trademarks in the U.S. and elsewhere.
10
W11391726A.indb 10
Bowl, white flat beater, white dough hook
and pouring shield* may be washed in
an automatic dishwasher. The wire whip
and these other basic accessories are not
dishwasher safe. Clean thoroughly in hot,
sudsy water and rinse completely before
drying.
Lubrication: Motor bearings are self-
lubricating and should require no further
attention under normal use.
The Stand Mixer may warm up during use. Under heavy
loads with extended mixing time periods, you may not
be able to comfortably touch the top of the unit. This is
normal.
The Stand Mixer may emit a pungent odor, especially
when new. This is common with electric motors. If flat
beater strikes bowl, stop the Stand Mixer. See "Beater to
bowl clearance."
Is your Stand Mixer plugged in?
Is the fuse in the circuit to the Stand Mixer in working
order? If you have a circuit breaker box, be sure the circuit
is closed.
Are the bowl and pouring shield* properly in place?
All service should be handled locally by an authorised
KitchenAid Service Centre. Contact the dealer from whom
the unit was purchased to obtain the name of the nearest
authorised KitchenAid Service Centre.
©2019 All rights reserved.
SOLUTION
9/26/2019 7:18:45 PM
Advertisement
Table of Contents
